Some low molecular weight alcohols of industrial importance are produced by the addition of water to alkenes. 527-07-1, formula is C6H11NaO7, Ethanol, isopropanol, 2-butanol, and tert-butanol are produced by this general method. Two implementations are employed, the direct and indirect methods. Electric Literature of 527-07-1
Zhang, Yuze;Li, Lijuan;Shi, Dong;Song, Fugen research published 《 Synthesis and application of low-cost layered double hydroxides intercalated by gluconic acid anion for flame retardancy and tensile strength conservation of high filling epoxy resin》, the research content is summarized as follows. Epoxy resin (EP) is a polymer that is widely used in different aspects of life, but its flammability property limits its fields of applications. Most flame retardants at present cannot be applied practically in scale due to their toxicity, incompatibility in polymers, degraded mech. property or high cost of raw materials and comprehensive preparation process. Layered double hydroxides intercalated by gluconic acid anion (GLDHs) may serve as a new approach. GLDHs with Mg/Al ratio of 3/1 and 2/1 were first coprecipitated with low-cost green reactants, MgCl2·6H2O, AlCl3·6H2O, NaOH and sodium gluconate. Their structures were confirmed by X-ray diffractions (XRD), transmission electron microscope (TEM), Fourier transform IR spectroscopy (FTIR) and elemental anal.; their thermal properties were analyzed by thermo gravimetric anal. (TGA). Composites containing 40 weight% GLDHs were easily manufactured with normal magnetic stirring without any filler precipitation The combustion properties of the composites filled with 40 weight% GLDHs2 are as follows: the limit oxygen index (LOI) could rise to 29.8% from 25.2% of pristine EP; UL-94 can reach V-1 level with total burning time of only 12.1 s without dropping; compared to pristine EP, the heat release rate peak (PHRR) could drop to 30% with heavy decrease in the smoke production rate and CO production rate. Dynamic mech. thermal anal. (DMA) tests showed that the addition of 40 weight% GLDHs had little impact on the glass transition temperature of the composites and could slightly improve their rigidity and toughness. Tensile strength of the composites filled with 40 weight% GLDHs2 was almost close to 88% of the tensile strength of pristine EP. Above all, GLDHs with good compatibility in polymers can serve as a promising environmental friendly and low-cost flame retardant for EP and other heterochain polymers.
Electric Literature of 527-07-1, Sodium Gluconate is the sodium salt of gluconic acid with chelating property. Sodium gluconate chelates and forms stable complexes with various ions, preventing them from engaging in chemical reactions.
Sodium gluconate is an organic sodium salt having D-gluconate as the counterion. It has a role as a chelator. It contains a D-gluconate.
D-Gluconic acid sodium salt is a glycol ether that is used as an injection solution. It has been shown to have antibacterial efficacy against wild-type strains of bacteria such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. The in vitro antimicrobial action of D-gluconic acid sodium salt was found to be due to its ability to inhibit bacterial growth by interfering with the synthesis of DNA. D-gluconic acid sodium salt also has been shown to have antihypertensive effects in rats through the inhibition of angiotensin II type 1 receptor (AT1) signaling pathway and erythrocyte proliferation. This drug also has been shown to bind benzalkonium chloride and x-ray diffraction data show that it is crystalline in nature. The analytical method for determining the concentration of D-gluconic acid sodium salt is by electrochemical impedance, 527-07-1.
Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts