Category: alcohols-buliding-blocks

Application of 39590-81-3, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 39590-81-3 as follows.

[1-(Hydroxymethyl)cyclopropyl]methanol obtained from Step A (0.2 g, 1.96 mmol), 4-bromo-2,6-difluoro-phenol (0.314 g, 1.5 mmol) and triphenylphosphine (0.393 g, 1.5 mmol) were dissloved in 24 mL of THF. Diisopropyl azocarboxylate (0.3 mL, 1.5 mmol) was added thereto, and the reaction mixture was stirred for 16 hours at room temperature. The mixture was concentrated under reduced pressure and purified by column chromatography to obtain the title compound (0.307 g, 70 %). 1H NMR (CDCl) delta 7.08 (2H, m), 4.08 (2H, s), 3.68 (2H, d), 1.84 (1H, t, OH), 0.62 (4H, m)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,39590-81-3, its application will become more common.

Reference:
Patent; LG LIFE SCIENCES LTD.; KIM, Young Kwan; PARK, Sang Yun; JOO, Hyun Woo; CHOI, Eun Sil; WO2014/209034; (2014); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Synthetic Route of 33420-52-9, Adding some certain compound to certain chemical reactions, such as: 33420-52-9, name is 2,2-Difluoropropan-1-ol,molecular formula is C3H6F2O, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 33420-52-9.

Example 2305- [9-(2,2-Difluoropropoxy)-6-methanesulfonyl-5- [(S)-oxan-4-yl(phenyl)methylj -5H-pyrido [3 ,2-bj indol-3-ylj -4-(2H3)methyl- 1-methyl- 1H-1 ,2,3-triazole To a stirred solution of 5- {9-fluoro-6-methanesulfonyl-5 – [(S)-oxan-4-yl(phenyl)methyl] -5H-pyrido [3 ,2-b]indol-3 -yl} -4-(2H3)methyl- 1-methyl-i H- 1,2,3 -triazole (31.0 mg, 0.0600 mmol) and 2,2-difluoropropan-2-ol (27.8 mg, 0.290 mmol) inNMP (0.30 mL) was added t-BuOK (25.9 mg, 0.230 mmol). This mixture was heated at65 C for 1 h and cooled to room temperature. The mixture was diluted with MeOH andpurified via preparative LC/MS with the following conditions: Column: Waters XBridgePhenyl, 19 x 200 mm, 5-rim particles; Mobile Phase A: 5:95 acetonitrile: water with 10-mM ammonium acetate; Mobile Phase B: 95:5 acetonitrile: water with 10-mMammonium acetate; Gradient: 15-70% B over 20 mm, then a 5-mm hold at 100% B; Flow: 20 mL/min. Fractions containing the desired product were combined and dried via centrifugal evaporation to give 5- [9-(2,2-difluoropropoxy)-6-methanesulfonyl-5 – oxan-4-yl(phenyl)methyl]-5H-pyrido [3 ,2-b]indol-3 -yl]-4-(2H3)methyl- i-methyl-i H15 1,2,3-triazole (13.8 mg, 37%). ?H NMR (500MHz, DMSO-d6) oe 8.60 (s, 1H), 8.29 (d,J8.8 Hz, 1H), 7.74 (s, 1H), 7.56 (br d, J7.7 Hz, 2H), 7.36-7.29 (m, 2H), 7.28-7.22 (m,1H), 7.18 (d, J=8.9 Hz, 1H), 6.74 (s, 1H), 4.67 (br t, J=12.0 Hz, 2H), 3.86 (br d, J15.iHz, 1H), 3.73 (s, 3H), 3.60-3.55 (m, 1H), 3.49 (brt,J=ii.5 Hz, 1H), 3.33 (br d,J11.8Hz, 1H), 3.23-3.16 (m, 1H), 2.54 (s, 3H), 1.95 (brt,J=19.4 Hz, 3H), 1.69 (br d,J10.8Hz, 1H), i.62-i.50(m, 1H), i.22(brd,J=8.8 Hz, 1H), 0.43 (brd,J=12.OHz, 1H).LCMS: RT = 1.731 mm; (ES): mlz (M+H)+ = 613.15, LCMS: Column: Waters Acquity UPLC BEH C 18, 2.1 x 50 mm, 1 .7-tim particles; Mobile Phase A: 5:95 acetonitrile:water with 10mM ammonium acetate; Mobile Phase B: 95:5 acetonitrile:water with 10mM ammonium acetate; Temperature: 50 C; Gradient: 0-100% B over 3 mm, then a 0.75-mmhold at 100% B; Flow: 1.11 mL/min. HPLC Purity at 220 nm: 95 %.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 33420-52-9, 2,2-Difluoropropan-1-ol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; NORRIS, Derek J.; DELUCCA, George V.; GAVAI, Ashvinikumar V.; QUESNELLE, Claude A.; GILL, Patrice; O’MALLEY, Daniel; VACCARO, Wayne; LEE, Francis Y.; DEBENEDETTO, Mikkel V.; DEGNAN, Andrew P.; FANG, Haiquan; HILL, Matthew D.; HUANG, Hong; SCHMITZ, William D.; STARRETT, JR, John E.; HAN, Wen-Ching; TOKARSKI, John S.; MANDAL, Sunil Kumar; WO2015/100282; (2015); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2002-24-6, name is 2-Aminoethanol hydrochloride. This compound has unique chemical properties. The synthetic route is as follows. Recommanded Product: 2002-24-6

9-(2′-hydroxyethylamino)-4-methyl-1 -nitroacridine 4-Methyl-1-nitro-9-phenoxyacridine (0.33 g) is dissolved in phenol (10 g), ethanolamine hydrochloride (0.2 g) is added and the mixture is heated at 80 C. for 0.5 hour. The reaction mixture is cooled to room temperature, diluted with ether, slowly poured into dry ether (200 ml) and acidified with ethereal solution of hydrogen chloride. The resulting precipitate is filtered off, washed with ether and crystallized from absolute ethanol to give 9-(2′-hydroxyethylamino)-4-methyl-1-nitroacridine monohydrochloride as orange crystals (0.27 g, 84%), m.p. 238 C. (decomp.) 1H NMR (d6DMSO): delta2.45 (s, 3H, CH3), 3.48 (q, 2H, H-2′), 3.65 (t, 2H, H-1′), 4.3 (t, 1H, OH), 7.1 (t, 1H, H-7), 2), 7.35 (d, 1H, J=7.8 Hz, H-3), 7.5 (t, 1H, H-6), 7.65 (d, 1H, J=8 Hz, H-5), 7.75 (d,1H, J=8.0 Hz, H-8).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2002-24-6, 2-Aminoethanol hydrochloride.

Reference:
Patent; Konopa, Jerzy Kazimierz; Wysocka-Skrzela, Barbara; Tiwari, Raj; US2002/99211; (2002); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Related Products of 56-81-5, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 56-81-5, name is Propane-1,2,3-triol. A new synthetic method of this compound is introduced below.

General procedure: 2.2 Adsorption of glycerol on silica gel (0009) Glycerol was adsorbed as follows: 1g of glycerol and 2g of silica gel were mechanically mixed until total adsorption on the solid. 2.3 Lipase-catalyzed esterification (0010) Esterification of glycerol was performed in 10mL flasks, which were kept in a thermostatic bath with temperature control and magnetic stirring. The reaction time was 6h. The reaction was carried out as follows: 110mg of capric acid were dissolved in 3mL n-heptane, then the amount of glycerol adsorbed onto silica fixed to each reaction under study was added. When the reactant mixture reached the selected temperature, the reaction was started by adding 50% of the total amount of enzyme to be added (time 0). The remaining 50% of the biocatalyst was added after 3h of reaction. The values of glycerol, immobilized lipase dosage and reaction temperature were established according to the experimental design explained below. Highly hydrophilic polyols cause loss of enzymatic activity. This may be due to two factors: (1) in a hydrophobic reaction medium, polyols adhere to the support of the lipase impeding access of the acid to the active site, or (2) the hydroxyl groups of the polyol strongly interact with the active site of the enzyme.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,56-81-5, its application will become more common.

Reference:
Article; Sanchez, Daniel Alberto; Tonetto, Gabriela Marta; Ferreira, Maria Lujan; Journal of Molecular Catalysis B: Enzymatic; vol. 100; (2014); p. 7 – 18;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13674-16-3, name is Methyl 2-hydroxy-3-phenylpropanoate. This compound has unique chemical properties. The synthetic route is as follows. Recommanded Product: 13674-16-3

EXAMPLE 112 (R)-2-[2,6-Dibromo-4-(6-methoxy-benzo[b]naphtho[2,3-d]thiophen-11-yl)-phenoxy]-3 -phenyl-propionic acid, methyl ester Prepared from 2,6-dibromo-4-(6-methoxy-benzo[b]naphtho[2,3-d]thiophen-11-yl)-phenol (Example 63) and (S)-2-hydroxy-3-phenylpropionic acid, methyl ester (Example 96) according to the procedure of Example 107. White solid (0.608 g, 96%): NMR (THF-d8); delta8.29-8.26 (m, 1 H), 7.87 (d., J=8 Hz, 1 H), 7.72 – 7.68 (dd, 2 H, J=4, 2 Hz), 7.60 – 7.56 (m, 2 H), 7.48-7.37 (m, 4 H), 7.32 – 7.28 (m, 2 H), 7.25-7.23 (m, 2 H), 7.20 – 7.15 (m, 2 H), 6.85 – 6.82 (m, 1 H), 5.22(dd, 1 H, J=14, 2, Hz), 4.17 (s, 1 H), 3.71 (s, 1 H), 3.58(s, 6 H),; MS (FAB+): [M+], 2 bromine isotope pattern, 674 (40%), 676 (66%), 678 (45%); Anal. Calc. for C33H24Br2O4S: C, 58.60, H, 3.58, N, 0.00. Found: C, 58.11, H, 3.53, N, 0.19.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 13674-16-3, Methyl 2-hydroxy-3-phenylpropanoate.

Reference:
Patent; American Home Products Corporation; US6110962; (2000); A;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 61367-62-2, 4-Bromo-3,5-dimethoxybenzyl alcohol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Safety of 4-Bromo-3,5-dimethoxybenzyl alcohol, blongs to alcohols-buliding-blocks compound. Safety of 4-Bromo-3,5-dimethoxybenzyl alcohol

To a mixture of 4-bromo-3,5-dimethoxybenzylalcohol (44.5 g), triethylammonium benzyl chloride (2.05 g) and 20percent aqueous sodium hydroxide solution (288 g) was added diethyl sulfate (41.7 g) under ice-cooling, and the mixture was stirred overnight at 25-30°C. After stirring for 1 hour at 70°C, the mixture was cooled and extracted with toluene. The toluene layer was washed with water and saturated aqueous NaCl solution and dried over magnesium sulfate. The solvent was removed in vacuo to yield 4-bromo-3,5-dimethoxybenzyl ethyl ether (49.5 g) as colorless oil. MS (m/z): 276 (M++2), 274 (M+)

At the same time, in my other blogs, there are other synthetic methods of this type of compound,61367-62-2, 4-Bromo-3,5-dimethoxybenzyl alcohol, and friends who are interested can also refer to it.

Reference:
Patent; TANABE SEIYAKU CO., LTD.; WO2003/72536; (2003); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 722-92-9, 2-(4-Aminophenyl)-1,1,1,3,3,3-hexafluoropropan-2-ol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, name: 2-(4-Aminophenyl)-1,1,1,3,3,3-hexafluoropropan-2-ol, blongs to alcohols-buliding-blocks compound. name: 2-(4-Aminophenyl)-1,1,1,3,3,3-hexafluoropropan-2-ol

To a solution of [2- (4-AMINOPHENYL)-1,] 1,1, 3,3, 3-hexafluoropropan-2-ol (Oakwood, 1.5 g, 5.8 [MMOL)] in THF (25 mL) was added lithium bis (trimethyl) amide (11.6 mL of a 1.0 M solution in THF). After stirring for 10 minutes, methyl [A-BROMOPHENYLACETATE] (1.3 g, 5.8 [MMOL)] was added. The reaction mixture was stirred at room temperature for 18 h. The mixture was diluted with ethyl acetate and washed with water and brine. The organic solution was dried [(MGS04)] and concentrated in vacuo. Purification by flash chromatography (4: 1 hexanes/EtOAc) gave the free base of the title compound. A solution of the free base in CH2CI2 (20 mL) was acidified with 4N HCI in dioxane. Hexane was added and the hydrochloride salt was collected by filtration and dried to give the title compound (50 mg, 2percent). 1H NMR (DMSO-d6) [8] 7.45 (d, 2H), 7.30 (m, 5H), 6.72 (d, 2H), 5.22 (s, [1 H),] 3.62 (s, 3H). MS (ES+) [M/Z 408 (MH+).]

At the same time, in my other blogs, there are other synthetic methods of this type of compound,722-92-9, 2-(4-Aminophenyl)-1,1,1,3,3,3-hexafluoropropan-2-ol, and friends who are interested can also refer to it.

Reference:
Patent; PHARMACIA CORPORATION; WO2003/99769; (2003); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Related Products of 3597-91-9, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.3597-91-9, name is [1,1′-Biphenyl]-4-ylmethanol, molecular formula is C13H12O, molecular weight is 184.23, as common compound, the synthetic route is as follows.

General procedure: To a 25-mL Schlenk tube equipped with a magnetic stirrer, CuCl (0.05 mol, 5 mol%), DABCO (0.10 mol, 10 mol%), 4-HO-TEMPO (0.05 mmol, 5 mol%) were added. Substrates 1 (1 mmol) and NH3 (aq, 25-28%, 3 mmol, 3.0 equiv) in CH3CN (2 mL) were added subsequently. Then the reaction mixture was stirred at room temperature for 24 h in the presence of an air balloon. The progress of the reaction was monitored by TLC. After completion, the reaction mixture was diluted with water and extracted with ethyl acetate. The organic layer was dried over anhydrous MgSO4. Subsequently, the combined organic layer was concentrated under reduced pressure and the crude product was purified by column chromatography to afford the corresponding products.

Statistics shows that 3597-91-9 is playing an increasingly important role. we look forward to future research findings about [1,1′-Biphenyl]-4-ylmethanol.

Reference:
Article; Hu, Yongke; Chen, Lei; Li, Bindong; Chinese Chemical Letters; vol. 29; 3; (2018); p. 464 – 466;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 41790-30-1, name is (5,6,7,8-Tetrahydronaphthalen-1-yl)methanol. This compound has unique chemical properties. The synthetic route is as follows. name: (5,6,7,8-Tetrahydronaphthalen-1-yl)methanol

To a solution of S5 (5.24 g, 32.3 mmol) in DCM (200 mL) at 0 C was added thionyl chloride (8.45 g, 71.1 mmol). The reaction mixture was stirred at r.t. for 24 h, then solvent was removed under reduced pressure. The residue was diluted with DCM (100 mL) and quenched with ice-water (100 mL). The organic phase was washed with sat. aq. NaHCO3, dried with Na2SO4 and concentrated to give 5-(chloromethyl)-1,2,3,4-tetrahydronaphthalene (S6) as a brown oil (3.25 g, 56%). 1H NMR (CDCl3) delta 7.16-7.05 (m, 3H), 4.59 (s, 2H), 2.86 (t, J = 6.3 Hz, 2H), 2.79 (t, J = 6.4 Hz, 2H), 1.88-1.77 (m, 4H). Found: [M+H]=181.6.

With the rapid development of chemical substances, we look forward to future research findings about 41790-30-1.

Reference:
Article; Sutherland, Hamish S.; Tong, Amy S.T.; Choi, Peter J.; Blaser, Adrian; Conole, Daniel; Franzblau, Scott G.; Lotlikar, Manisha U.; Cooper, Christopher B.; Upton, Anna M.; Denny, William A.; Palmer, Brian D.; Bioorganic and Medicinal Chemistry; vol. 27; 7; (2019); p. 1292 – 1307;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2240-88-2, name is 3,3,3-Trifluoropropan-1-ol. This compound has unique chemical properties. The synthetic route is as follows. category: alcohols-buliding-blocks

To a dried round-bottom flask, 3,5-dimethylbenzoic acid (600 mg, 4.0 mmol) was dissolved inCH2Cl2 (14 mL) and a few drops of DMF was added. Oxalyl chloride (370 L, 4.4 mmol) wasadded dropwise resulting in gas evolution. The mixture was stirred for 30 min. 3,3,3-Trifluoropropan-1-ol (460 mg, 4.0 mmol), DMAP (10 mg, 0.080 mmol) and NEt3 (1.1 mL, 8.0mmol) were dissolved in CH2Cl2 (2.0 mL) and the CH2Cl2 solution was added to the reactionmixture. The mixture was stirred at ambient temperature overnight. To the resulting mixture, H2Owas added and extracted with Et2O three times. Combined organic extracts were washed with 1MNaOH aq., 1M HCl aq. and brine and dried over MgSO4. Concentrated mixture was purified byflash column chromatography (hexane/EtOAc = 100/1 to 20/1) to give the title compound(colorless oil, 703 mg, 71percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2240-88-2, 3,3,3-Trifluoropropan-1-ol.

Reference:
Article; Furukawa, Takayuki; Tobisu, Mamoru; Chatani, Naoto; Bulletin of the Chemical Society of Japan; vol. 90; 3; (2017); p. 332 – 342;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts