Tag: 100-200

Synthetic Route of C6H12OIn 2019 ,《Randomly Functionalized Polyethylenes: In Quest of Avoiding Catalyst Deactivationã€?appeared in ACS Catalysis. The author of the article were Bouyahyi, Miloud; Turki, Younes; Tanwar, Akhilesh; Jasinska-Walc, Lidia; Duchateau, Rob. The article conveys some information:

Well-defined randomly functionalized polyolefins produced by catalysis form an interesting class of polymers with great potential for various applications. One of the major challenges for the production of these materials forms the incompatibility of the commonly used electrophilic group 4 metal based catalysts and the desired nucleophilic, especially protic functionalities like hydroxyl and carboxylic acid groups. Although pacification of the protic functionality remains necessary, it was found that lowering the oxidation state of a constrained geometry type of catalyst from Ti(IV) to Ti(III) turned the catalyst unexpectedly tolerant to a wide variety of aluminum alkyl pacified, hydroxyl-functionalized olefin comonomers. The catalyst’s tendency to undergo chain transfer to aluminum, which was found to be intensified by the presence of aluminum alkyl pacified, hydroxyl-functionalized comonomers, can be efficiently suppressed by the addition of a sterically hindered phenol such as 2,6-bis(1,1-dimethylethyl)-4-methylphenol (BHT). Surprisingly, the addition of BHT also increases the catalyst’s affinity to incorporate these functionalized comonomers. In the experiment, the researchers used 5-Hexen-1-ol(cas: 821-41-0Synthetic Route of C6H12O)

5-Hexen-1-ol(cas: 821-41-0) is used in cyclization to a tetrahydropyran by phenylselenoetherification. It is also used as a building block in synthetic chemistry.Synthetic Route of C6H12O

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Product Details of 27489-62-9In 2018 ,《The Rhodium Catalysed Direct Conversion of Phenols to Primary Cyclohexylaminesã€?appeared in ChemCatChem. The author of the article were Tomkins, Patrick; Valgaeren, Carlot; Adriaensen, Koen; Cuypers, Thomas; Vos, Dirk E. De. The article conveys some information:

Cyclohexylamines are important intermediates in chem. industry, which are currently produced from petrochem. sources. Phenols, however, are an attractive sustainable feedstock. We here demonstrate the transformation of phenols with ammonia to primary cyclohexylamines. In contrast to previously reported chem. which used palladium catalysts, we here show that rhodium is an excellent catalyst for the formation of primary cyclohexylamines. Different parameters were studied and it was shown that the reaction is applicable to a scope of phenolic compounds providing high selectivity. In the experiment, the researchers used many compounds, for example, trans-4-Aminocyclohexanol(cas: 27489-62-9Product Details of 27489-62-9)

trans-4-Aminocyclohexanol(cas: 27489-62-9) belongs to anime. Nitrous acid converts secondary amines (aliphatic or aromatic) to N-nitroso compounds (nitrosamines): R2NH + HNO2 â†?R2N―NO. Some nitrosamines are potent cancer-inducing substances, and their possible formation is a serious consideration when nitrites, which are salts of nitrous acid, are present in foods or pharmaceutical preparations. Tertiary amines give rise to nitrosamines more slowly; an alkyl group is eliminated as an aldehyde or ketone, along with nitrous oxide, N2O.Product Details of 27489-62-9

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Quality Control of (4-Bromophenyl)methanolIn 2019 ,《Dehydrogenative Cross-Coupling of Primary Alcohols To Form Cross-Esters Catalyzed by a Manganese Pincer Complexã€?appeared in ACS Catalysis. The author of the article were Das, Uttam Kumar; Ben-David, Yehoshoa; Leitus, Gregory; Diskin-Posner, Yael; Milstein, David. The article conveys some information:

Base-metal-catalyzed dehydrogenative cross-coupling of primary alcs. to form cross-esters as major products, liberating hydrogen gas, is reported. The reaction is catalyzed by a pincer complex of earth-abundant manganese in the presence of catalytic base, without any hydrogen acceptor or oxidant. Mechanistic insight indicates that a dearomatized complex is the actual catalyst, and indeed this independently prepared dearomatized complex catalyzes the reaction under neutral conditions. The experimental part of the paper was very detailed, including the reaction process of (4-Bromophenyl)methanol(cas: 873-75-6Quality Control of (4-Bromophenyl)methanol)

(4-Bromophenyl)methanol(cas: 873-75-6) undergoes three-component reaction with acetylferrocene and arylboronic acid to give ferrocenyl ketones containing biaryls.Quality Control of (4-Bromophenyl)methanol It is used in the synthesis of amphiphilic, symmetric rod-coil, triblock copolymer of poly(9,9-didodecylfluorene-2,7-diyl) and poly(hydroxyl ethyl methacrylate)

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In 2022,Fernandes, Raquel A.; Sampaio, Maria J.; Faria, Joaquim L.; Silva, Claudia G. published an article in Molecules. The title of the article was 《Synthesis of Vitamin B3 through a Heterogeneous Photocatalytic Approach Using Metal-Free Carbon Nitride-Based Catalystsã€?SDS of cas: 100-55-0 The author mentioned the following in the article:

Vitamin B3 (nicotinic acid, VB3) was synthesized through the photocatalytic oxidation of 3-pyridinemethanol (3PM) under visible-light-emitting diode (LED) irradiation using metal-free graphitic carbon nitride (GCN) – based materials. A bulk (GCN) material was prepared by a simple thermal treatment using dicyandiamide as the precursor. A post-thermal treatment under static air and nitrogen flow was employed to obtain the GCN-T and GCN-T-N materials, resp. The conditions adopted during the post-treatment revealed differences in the resulting materials’ morphol., electronic, and optical properties. The post-treated photocatalysts revealed an enhanced efficiency in the oxidation of 3PM into VB3, with the GCN-T-N photocatalyst being the best-performing material. The defective surface, reduced crystallinity, and superior photoabsorption of GCN-T-N account for this material’s improved performance in the production of VB3. Nevertheless, the presence of nitrogen vacancies in the carbon nitride structure and, consequently, the creation of mid-gap states also accounts to its highly oxidative ability. The immobilization of GCN-T-N in sodium alginate hydrogel was revealed as a promising strategy to produce VB3, avoiding the need for the photocatalyst separation step. Concerning the mechanism of synthesis of VB3 through the photocatalytic oxidation of 3PM, it was possible to identify the presence of 3-pyridinecarboxaldehyde (3PC) as the intermediary product. In the experiment, the researchers used 3-Pyridinemethanol(cas: 100-55-0SDS of cas: 100-55-0)

3-Pyridinemethanol(cas: 100-55-0) belongs to pyridine. When pyridine is adsorbed on oxide surfaces or in porous materials, the following species are commonly observed: (i) pyridine coordinated to Lewis acid sites, (ii) pyridine H-bonded to weakly acidic hydroxyls, and (iii) protonated pyridine. At high coverage, physisorbed pyridine and protonated dimers can also be observed.SDS of cas: 100-55-0

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In 2022,Li, Yan; Chen, Hui; Lai, Hanjian; Xue, lai; Rehman, Tahir; Zhu, Yulin; Wang, Yunpeng; Wu, Qinghe; He, Feng published an article in ACS Materials Letters. The title of the article was 《Efficient and stable quasiplanar heterojunction solar cells with acetoxy-substituted wide-bandgap polymerã€?Recommanded Product: 6-Aminohexan-1-ol The author mentioned the following in the article:

Intermol. interactions have fundamental importance in the control of active layer morphol., exciton generation, charge transport, and, thus, the overall photovoltaic performance. This is especially true for quasiplanar heterojunction (Q-PHJ) polymer solar cells, because the bilayer device structure requires larger exciton diffusion lengths. However, little effort has been made to design polymer donors with addnl. organic functional groups intended to control intermol. hydrogen-bonding interactions. Herein, we report two new copolymers for Q-PHJ solar cells synthesized by the addition of hydroxy (PNTB-OH) and acetoxy groups (PNTB-OAc) onto electron-deficient units. We have systematically investigated the influence of the hydrogen bond on electro-optical behaviors, crystallinity, photovoltaic properties, energy losses, photostability, and storage stability in both types of polymers. The single-crystal data reveals more regular stacking and order orientation driven by hydrogen bonding, of the acetoxy-substituted electron-deficient units. Q-PHJ organic solar cells (OSCs) were fabricated for both polymers with a high-performance nonfullerene acceptor N3. PNTB-OAc-based Q-PHJ OSCs realized the highest photovoltaic performance of 16.53%, which is ~2.4 times higher than 6.79% obtained from the PNTB-OH-based Q-PHJ OSCs. This high performance is attributable to low nonradiative energy losses, high and balanced electron/hole mobility, and better crystallinity. In contrast, the PNTB-OAc film has a longer crystal coherence length, which is calculated from grazing-incidence wide-angle X-ray scattering (GIWAXS). Furthermore, the PNTB-OAc device demonstrated superior photostability and storage stability, retained more than 85% of the initial PCE after illumination for 1050 h, and 90% of the initial PCE under nitrogen for 1600 h. This work highlights the importance of the acetoxy group to significantly control packing and crystallinity by hydrogen bonding, thus realizing efficient OSCs with durable device stability. In addition to this study using 6-Aminohexan-1-ol, there are many other studies that have used 6-Aminohexan-1-ol(cas: 4048-33-3Recommanded Product: 6-Aminohexan-1-ol) was used in this study.

6-Aminohexan-1-ol(cas: 4048-33-3) may be used along with glutaric acid to generate poly(ester amide)s with excellent film- and fiber forming properties. It can undergo cyclization over copper supported on γ-alumina and magnesia to form hexahydro-1H-azepine.Recommanded Product: 6-Aminohexan-1-ol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

The author of 《Phosphine-Free Well-Defined Mn(I) Complex-Catalyzed Synthesis of Amine, Imine, and 2,3-Dihydro-1H-perimidine via Hydrogen Autotransfer or Acceptorless Dehydrogenative Coupling of Amine and Alcohol》 were Das, Kalicharan; Mondal, Avijit; Pal, Debjyoti; Srivastava, Hemant Kumar; Srimani, Dipankar. And the article was published in Organometallics in 2019. Quality Control of (4-Bromophenyl)methanol The author mentioned the following in the article:

The application of nontoxic, earth-abundant transition metals in place of costly noble metals is a paramount goal in catalysis and is especially interesting if the air- and moisture-stable ligand scaffold was used. Herein, the authors report the synthesis of amines/imines directly from alc. and amines via H autotransfer or acceptorless dehydrogenation catalyzed by well-defined phosphine-free Mn complexes. Both imines and amines can be obtained from the same set of alcs. and amines using the same catalyst, only by tuning the reaction conditions. The amount and nature of the base are a highly important aspect for the observed selectivity. Both the primary and secondary amines were employed as substrates for the N-alkylation reaction. As a highlight, the authors showed the chemoselective synthesis of resveratrol derivatives Also, the Mn-catalyzed dehydrogenative synthesis of structurally important 2,3-dihydro-1H-perimidines also was demonstrated. D. functional theory calculations were also carried out to model the reaction path and to calculate the reaction profile. After reading the article, we found that the author used (4-Bromophenyl)methanol(cas: 873-75-6Quality Control of (4-Bromophenyl)methanol)

(4-Bromophenyl)methanol(cas: 873-75-6) undergoes three-component reaction with acetylferrocene and arylboronic acid to give ferrocenyl ketones containing biaryls.Quality Control of (4-Bromophenyl)methanol It undergoes oxidation reaction in the presence of polyvinylpolypyrrolidone-supported hydrogen peroxide, silica sulfuric acid and ammonium bromide to yield 4-bromobenzaldehyde.

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

The author of 《Preparation of Heterocycles via Visible-Light-Driven Aerobic Selenation of Olefins with Diselenides》 were Zhang, Qing-Bao; Yuan, Pan-Feng; Kai, Liang-Lin; Liu, Kai; Ban, Yong-Liang; Wang, Xue-Yang; Wu, Li-Zhu; Liu, Qiang. And the article was published in Organic Letters in 2019. Name: 5-Hexen-1-ol The author mentioned the following in the article:

The aerobic dehydrogenative cyclization of alkenes with easily accessible diselenides facilitated by visible light is reported. Notably, the features of this transition-metal-free protocol are pronounced efficiency and practicality, good functional group tolerance, atom economy, and high sustainability, since ambient air and visible light are adequate for the clean construction of five- and six membered heterocycles in yields of up to 98%. After reading the article, we found that the author used 5-Hexen-1-ol(cas: 821-41-0Name: 5-Hexen-1-ol)

5-Hexen-1-ol(cas: 821-41-0) is a volatile organic compound. Further, it is used to prepare 6-bromo-hex-1-ene by reaction with phosphorus tribromide.Name: 5-Hexen-1-ol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In 2019,Catalysis Letters included an article by Dutta, Apurba; Chetia, Mitali; Ali, Abdul A.; Bordoloi, Ankur; Gehlot, Praveen S.; Kumar, Arvind; Sarma, Diganta. Product Details of 821-41-0. The article was titled 《Copper Nanoparticles Immobilized on Nanocellulose: A Novel and Efficient Heterogeneous Catalyst for Controlled and Selective Oxidation of Sulfides and Alcohols》. The information in the text is summarized as follows:

In this work, we have described the versatility of low metal loading copper nanoparticles immobilized on nanocellulose for the controlled and selective oxidation of sulfides to sulfoxides and primary alcs. to aldehydes using green oxidant at room temperature Aromatic, aliphatic and heterocyclic sulfides were oxidized to their corresponding sulfoxides with high yields without formation of over oxidized sulfones. Similarly, benzylic, allylic and aliphatic alcs. were selectively oxidized to aldehydes without traces of carboxylic acids in good to excellent yields. In addition to this study using 5-Hexen-1-ol, there are many other studies that have used 5-Hexen-1-ol(cas: 821-41-0Product Details of 821-41-0) was used in this study.

5-Hexen-1-ol(cas: 821-41-0) is a volatile organic compound. Further, it is used to prepare 6-bromo-hex-1-ene by reaction with phosphorus tribromide.Product Details of 821-41-0

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In 2019,Organic Letters included an article by Khan, Sardaraz; Li, Hongfang; Zhao, Can; Wu, Xue; Zhang, Yong Jian. Recommanded Product: 2,6-Pyridinedimethanol. The article was titled 《Asymmetric Allylic Etherification of Vinylethylene Carbonates with Diols via Pd/B Cooperative Catalysis: A Route to Chiral Hemi-Crown Ethers》. The information in the text is summarized as follows:

Pd-catalyzed regio- and enantioselective allylic etherification of vinylethylene carbonates (VECs) with diols has been developed. By using cooperative catalysts of the chiral palladium complex and triethylborane in mild conditions, the process gave monoetherified and bisetherified polyglycol derivatives with tetrasubstituted stereocenters in high yields with complete regioselectivities and high levels of enantio- and diastereoselectivities. In addition to this study using 2,6-Pyridinedimethanol, there are many other studies that have used 2,6-Pyridinedimethanol(cas: 1195-59-1Recommanded Product: 2,6-Pyridinedimethanol) was used in this study.

2,6-Pyridinedimethanol(cas: 1195-59-1) belongs to pyridine. Pyridines are often used as catalysts or reagents; particular notice has been paid recently to how pyridine coordinates to metal centers enabling a wide range of valuable reactions. Recommanded Product: 2,6-Pyridinedimethanol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In 2019,RSC Advances included an article by Walia, Preet Kamal; Sharma, Manik; Kumar, Manoj; Bhalla, Vandana. Related Products of 873-75-6. The article was titled 《UV light promoted ‘Metal’/’Additive’-free oxidation of alcohols: investigating the role of alcohols as electron donors》. The information in the text is summarized as follows:

UV light promoted selective oxidation of primary and secondary alcs. RCH(R1)OH [R = Ph, cyclohexyl, thiophen-2-yl, etc.; R1 = H, Ph, Me; RR1 = -(CH2)5-], 1,3-benzenedimethanol and 9H-fluoren-9-ol has been demonstrated under ‘metal-free’ and ‘additive-free’ conditions. Under the optimized conditions, a variety of aromatic, heteroaromatic, and alicyclic alcs. have been examined for their transformations to the corresponding carbonyl compounds RC(O)R1, isophthalaldehyde and 9H-fluoren-9-one. The mechanistic studies emphasize the important role of substrate (alc.) and solvent (DMSO) in the generation of superoxide radical which is a vital intermediate for the transformation. This study also highlights the role of air as the oxidant in the oxidation process. Further, the practical application of the strategy has also been demonstrated for the oxidation of the alc. moiety in cholesterol. In addition to this study using (4-Bromophenyl)methanol, there are many other studies that have used (4-Bromophenyl)methanol(cas: 873-75-6Related Products of 873-75-6) was used in this study.

(4-Bromophenyl)methanol(cas: 873-75-6) undergoes three-component reaction with acetylferrocene and arylboronic acid to give ferrocenyl ketones containing biaryls.Related Products of 873-75-6 It undergoes efficient trimethylsilylation reaction with 1,1,1,3,3,3-hexamethyldisilazane in the presence of catalytic amount of aspartic acid in acetonitrile.

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts