Carmona, Daniel et al. published their research in Dalton Transactions in 2014 | CAS: 1122-71-0

6-Methyl-2-pyridinemethanol (cas: 1122-71-0) belongs to alcohols. Similar to water, an alcohol can be pictured as having an sp3 hybridized tetrahedral oxygen atom with nonbonding pairs of electrons occupying two of the four sp3 hybrid orbitals. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Recommanded Product: 6-Methyl-2-pyridinemethanol

Hydroxymethylpyridine containing half-sandwich complexes of Rh(III), Ir(III) or Ru(II) was written by Carmona, Daniel;Lamata, Pilar;Sanchez, Antonio;Pardo, Pilar;Rodriguez, Ricardo;Ramirez, Paola;Lahoz, Fernando J.;Garcia-Orduna, Pilar;Oro, Luis A.. And the article was included in Dalton Transactions in 2014.Recommanded Product: 6-Methyl-2-pyridinemethanol This article mentions the following:

Complexes of the formula [(畏n-ring)M(NOH){(R)-P1}][SbF6]2 ((畏n-ring)M = (畏5-C5Me5)Rh, (畏5-C5Me5)Ir, (畏6-p-MeC6H4iPr)Ru; NOH = hydroxymethylpyridine ligand; {(R)-P1} = (R)-monophos) have been prepared from the corresponding dimers [{(畏n-ring)MCl}2(渭-Cl)2] through routes involving [(畏5-C5Me5)RhCl2{(R)-P1}] or [(畏n-ring)MCl(NOH)][SbF6] intermediates. The new complexes have been characterized by anal. and spectroscopic means, including the determination of the crystal structures of [(畏5-C5Me5)IrCl2{(R)-P1}] (1b), [(畏6-p-MeC6H4iPr)RuCl(NOH-1)][SbF6] (2c), [(畏5-C5Me5)IrCl{(R)-NOH-2}][SbF6] ((R)-3b), [(畏5-C5Me5)Rh(NOH-1){(R)-P1}][SbF6]2 (4a) and [(畏6-p-MeC6H4iPr)Ru{(R)-NOH-2}{(S)-P1}][SbF6]2 ((R)-5c’) by x-ray diffractometric methods. From NMR and x-ray data, the absolute configuration of the new chiral compounds was established. In the experiment, the researchers used many compounds, for example, 6-Methyl-2-pyridinemethanol (cas: 1122-71-0Recommanded Product: 6-Methyl-2-pyridinemethanol).

6-Methyl-2-pyridinemethanol (cas: 1122-71-0) belongs to alcohols. Similar to water, an alcohol can be pictured as having an sp3 hybridized tetrahedral oxygen atom with nonbonding pairs of electrons occupying two of the four sp3 hybrid orbitals. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Recommanded Product: 6-Methyl-2-pyridinemethanol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Bayoro, Danielle K. et al. published their research in BMC Anesthesiology in 2022 | CAS: 57-55-6

1,2-Propanediol (cas: 57-55-6) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Computed Properties of C3H8O2

Impact of parylene coating on heating performance of intravenous fluid warmer: a bench study was written by Bayoro, Danielle K.;Groepenhoff, Herman;Hoolihan, Daniel;Rose, Edward A.;Pedro, Michael J.;Waldmann, Andreas D.. And the article was included in BMC Anesthesiology in 2022.Computed Properties of C3H8O2 This article mentions the following:

Abstract: Background: Perioperative hypothermia is a common occurrence, particularly with the elderly and pediatric age groups. Hypothermia is associated with an increased risk of perioperative complications. One method of preventing hypothermia is warming the infused fluids given during surgery. The enFlow i.v. fluid warmer has recently been reintroduced with a parylene coating on its heating blocks. In this paper, we evaluated the impact of the parylene coating on the new enFlows fluid warming capacity. Methods: Six coated and six uncoated enFlow cartridges were used. A solution of 10propylene glycol and 90distd. H2O was infused into each heating cartridge at flow rates of 2, 10, 50, 150, and 200 mL/min. The infused fluid temperature was set at 4掳C, 20掳C, and 37掳C. Output temperature was recorded at each level. Data for anal. was derived from 18 runs at each flow rate (six cartridges at three temperatures). Results: The parylene coated fluid warming cartridge delivered very stable output of 40掳C temperatures at flow rates of 2, 10, and 50 mL/min regardless of the temperature of the infusate. At higher flow rates, the cartridges were not able to achieve the target temperature with the colder fluid. Both cartridges performed with similar efficacy across all flow rates at all temperatures Conclusions: At low flow rates, the parylene coated enFlow cartridges was comparable to the original uncoated cartridges. At higher flow rates, the coated and uncoated cartridges were not able to achieve the target temperature The parylene coating on the aluminum heating blocks of the new enFlow i.v. fluid warmer does not neg. affect its performance compared to the uncoated model. In the experiment, the researchers used many compounds, for example, 1,2-Propanediol (cas: 57-55-6Computed Properties of C3H8O2).

1,2-Propanediol (cas: 57-55-6) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Computed Properties of C3H8O2

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Dong, Baoqi et al. published their research in Journal of Food Biochemistry in 2022 | CAS: 57-55-6

1,2-Propanediol (cas: 57-55-6) belongs to alcohols. Alkyl halides are often synthesized from alcohols, in effect substituting a halogen atom for the hydroxyl group. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Product Details of 57-55-6

In vitro and in vivo evaluation of cinnamaldehyde Microemulsion-Mucus interaction was written by Dong, Baoqi;Chen, Jingbao;Cai, Ye;Wu, Wenqing;Chu, Xiaoqin. And the article was included in Journal of Food Biochemistry in 2022.Product Details of 57-55-6 This article mentions the following:

The current investigation explores the possible mechanism of the microemulsion drug delivery system to improve the oral bioavailability of cinnamaldehyde (CA), an important food spice, from the perspective of the microemulsion-mucus system. The cinnamaldehyde microemulsion (CA-ME) was prepared by the water titration method combined with the pseudo-ternary phase diagram. The dynamic anal. was applied to detect the drug release in vitro. An intestinal mucosal injury test was conducted to evaluate the safety of CA-ME and drug absorption across the intestinal tract of rats was investigated through an Ussing chamber system. The rheol. of blank mucus and drug-loaded mucus was investigated using a rheometer. The bioavailability of CA-ME in rats was evaluated through pharmacokinetic characteristics. The ratio of optimal prescription was Tween 80: 1,2-propanediol: vitamin E oil: CA: water = 24.3:4.8:5:7.5:58.4. The droplets were uniform in size and evenly dispersed. Rheol. studies showed that the microemulsion-mucus system all exhibit pseudoplastic fluid behavior, and CA-ME increased the viscosity of the mucus to a certain extent. Compared with CA solution, CA-ME promoted the absorption of CA in various intestinal segments, especially the ileum. Pharmacokinetic experiments showed that the relative bioavailability of CA-ME was enhanced 2.5-fold higher than that of CA solution ME as a carrier for lipophobic substances, may increase the viscosity of the intestine mucus system to obtain longer residue time and better absorption. In this study, in vitro absorption Ussing model was combined with rheol. and pharmacokinetic anal. to systematically analyze the intestinal mucus mechanism of microemulsion to improve the oral bioavailability of cinnamic aldehyde. It laid the foundation for exploring the absorption and transport of drugs in the intestinal mucus barrier. In the experiment, the researchers used many compounds, for example, 1,2-Propanediol (cas: 57-55-6Product Details of 57-55-6).

1,2-Propanediol (cas: 57-55-6) belongs to alcohols. Alkyl halides are often synthesized from alcohols, in effect substituting a halogen atom for the hydroxyl group. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Product Details of 57-55-6

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Hubner, A. M. et al. published their research in Journal of Dairy Science in 2022 | CAS: 57-55-6

1,2-Propanediol (cas: 57-55-6) belongs to alcohols. Similar to water, an alcohol can be pictured as having an sp3 hybridized tetrahedral oxygen atom with nonbonding pairs of electrons occupying two of the four sp3 hybrid orbitals. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Synthetic Route of C3H8O2

A randomized controlled trial examining the effects of treatment with propylene glycol and injectable cyanocobalamin on naturally occurring disease, milk production, and reproductive outcomes of dairy cows diagnosed with concurrent hyperketonemia and hypoglycemia was written by Hubner, A. M.;Canisso, I. F.;Peixoto, P. M.;Coelho, W. M. Jr.;Ribeiro, L.;Aldridge, B. M.;Lima, F. S.. And the article was included in Journal of Dairy Science in 2022.Synthetic Route of C3H8O2 This article mentions the following:

The objective of this study was to assess the effects of treatment with propylene glycol (PG) and cyanocobalamin (B12) on health, milk production, and reproductive outcomes of cows diagnosed with hyperketonemia (HK), hypoglycemia (HG), or concurrent HKHG. Glucose and 尾-hydroxybutyric acid (BHBA) concentrations were assessed in whole blood using a handheld device in lactating dairy cows (n = 2,418) between 3 and 9 d postpartum. Cows categorized as HK (n = 232, BHBA 鈮?.2 mmol/L), HG (n = 161, glucose 鈮?.2 mmol/L), and concurrent HKHG (n = 204, BHBA 鈮?.2 mmol/L, and glucose 鈮?.2 mmol/L) were randomized to receive treatment or to remain untreated (control). Treatment consisted of a single dose of B12 (10 mg, i.m.) and 300 mL of PG orally for 5 d, starting on the day of cow-side testing. Milk production, health, and reproductive outcomes were analyzed according to groups. Statistical anal. was carried out using SAS version 9.4 (SAS/STAT, SAS Institute Inc.). Treatment in HG cows decreased clin. ketosis, increased milk production in the fifth week of lactation for multiparous cows, and tended to increase 305-d mature-equivalent milk yield (305ME) for primiparous cows compared with untreated cows with the same metabolic profile. For cows with HKHG, treatment increased 305ME in multiparous cows and tended to increase 305ME in primiparous cows. No differences were found for treatment among any of the metabolic groups regarding reproductive outcomes, nor were any treatment effects found among HK cows. Glycemic status may help identify metabolically challenged early postpartum dairy cows, which may have differential response to PG and B12 treatment. In the experiment, the researchers used many compounds, for example, 1,2-Propanediol (cas: 57-55-6Synthetic Route of C3H8O2).

1,2-Propanediol (cas: 57-55-6) belongs to alcohols. Similar to water, an alcohol can be pictured as having an sp3 hybridized tetrahedral oxygen atom with nonbonding pairs of electrons occupying two of the four sp3 hybrid orbitals. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Synthetic Route of C3H8O2

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Stratigaki, Maria et al. published their research in Polymer Chemistry in 2020 | CAS: 109-17-1

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.SDS of cas: 109-17-1

Fractography of poly(N-isopropylacrylamide) hydrogel networks crosslinked with mechanofluorophores using confocal laser scanning microscopy was written by Stratigaki, Maria;Baumann, Christoph;van Breemen, Lambert C. A.;Heuts, Johan P. A.;Sijbesma, Rint P.;Goestl, Robert. And the article was included in Polymer Chemistry in 2020.SDS of cas: 109-17-1 This article mentions the following:

Due to their soft and brittle nature, the mech. characterization of polymer hydrogels is a difficult task employing traditional testing equipment. This paper studies poly(N-iso-Pr acrylamide) (PNIPAAm) hydrogel networks with Diels-Alder adducts of 蟺-extended anthracenes as mechanofluorophore crosslinkers. After swelling the networks with varying amounts of water and subjecting them to force, the subsequent fluorescence caused by covalent bond scission is visualized with confocal laser scanning microscopy (CLSM) and the intensities is related to the macroscopic fracture mechanics and the elastic moduli recorded with traditional uniaxial compression. The sensitivity of the mechanofluorophores allowed the anal. of low levels of mech. stress produced through a hand-induced needle-puncturing process and, thus, is an alternative to conventional force application methods. The detection and precise localization of covalent bond scission through CLSM helps elucidating the interrelationship between mol. structure and the macroscopic properties of chem. crosslinked polymeric hydrogels. The micro-scale mechanophore-assisted fractog. can establish a new paradigm for the mech. anal. of soft matter in fields covering traditional polymer and life sciences. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1SDS of cas: 109-17-1).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.SDS of cas: 109-17-1

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Juszynska-Galazka, Ewa et al. published their research in Phase Transitions in 2018 | CAS: 2968-93-6

2-(4-(Trifluoromethyl)phenyl)ethanol (cas: 2968-93-6) belongs to alcohols. Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Reference of 2968-93-6

Vibrational dynamics of glass forming: 2-phenylbutan-1-ol (BEP), 2-(trifluoromethyl)phenethyl alcohol (2TFMP) and 4-(trifluoromethyl)phenethyl alcohol (4TFMP) in their thermodynamic phases was written by Juszynska-Galazka, Ewa;Zajac, Wojciech;Saito, Kazuya;Yamamura, Yasuhisa;Jurus, Natalia. And the article was included in Phase Transitions in 2018.Reference of 2968-93-6 This article mentions the following:

The complex polymorphism and vibrational dynamics of three glass-forming single-phenyl-ring alcs. (with and without fluorine atoms) have been studied by complementary methods. Glass of isotropic liquid phase and cold crystallization of metastable supercooled liquid state were detected. Temperature investigations of vibrational motions show important role of hydrogen bonds in interactions between mols. Theor. calculations for isolated mol., as well as dimer- and tetramer-type aggregates of non-covalently bound mols., allow for a good description of exptl. spectra. Intermol. interactions of mols. with ortho and para positions of CF3 group in Ph ring have a similar influence on the spectra observed In the experiment, the researchers used many compounds, for example, 2-(4-(Trifluoromethyl)phenyl)ethanol (cas: 2968-93-6Reference of 2968-93-6).

2-(4-(Trifluoromethyl)phenyl)ethanol (cas: 2968-93-6) belongs to alcohols. Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Reference of 2968-93-6

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Goldstein, Irwin et al. published their research in Menopause (New York, N.Y.) in 2019 | CAS: 128607-22-7

(Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol (cas: 128607-22-7) belongs to alcohols. A strong base can deprotonate an alcohol to yield an alkoxide ion (R鈥昈鈭?. For example, sodamide (NaNH2), a very strong base, abstracts the hydrogen atom of an alcohol. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Quality Control of (Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol

Effects of ospemifene on genitourinary health assessed by prospective vulvar-vestibular photography and vaginal/vulvar health indices. was written by Goldstein, Irwin;Simon, James A;Kaunitz, Andrew M;Altomare, Corrado;Yoshida, Yuki;Zhu, Julie;Schaffer, Sam;Soulban, Graziella. And the article was included in Menopause (New York, N.Y.) in 2019.Quality Control of (Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol This article mentions the following:

OBJECTIVE: To prospectively evaluate the effects of ospemifene on the vulva and vagina in postmenopausal women using vulvar-vestibular photography and direct visual assessments. METHODS: Postmenopausal women (aged 40-80 years) with moderate to severe vaginal dryness as their most bothersome symptom (MBS) were randomized to daily ospemifene 60鈥妋g or placebo in this 12-week, multicenter, double-blind, phase 3 study. Vulvar-vestibular photographic images were captured at baseline and week 12 and were independently assessed with the Vulvar Imaging Assessment Scale (VIAS). Changes from baseline in Vaginal and Vulvar Health Indices (VHI and VuHI) with ospemifene versus placebo were analyzed at weeks 4, 8, and 12. Correlations between VIAS, VHI, and VuHI, with vaginal dryness severity and the Female Sexual Function Index (FSFI) scores were also assessed. RESULTS: In all, 631 eligible participants were randomized (ospemifene 316, placebo 315) and included in the intention-to-treat population. Compared with placebo, ospemifene significantly improved total scores for VIAS (P鈥?鈥?.0154), VHI (P鈥?lt;鈥?.0001), and VuHI (P鈥?lt;鈥?.0001) from baseline to week 12; significant VHI (P鈥?lt;鈥?.0001) and VuHI (P鈥?鈥?.002) improvements were observed at week 4. Most VHI and VuHI individual items were significantly better with ospemifene versus placebo at week 12 (P鈥?lt;鈥?.05). Most correlations between the vulvovaginal assessment total scores versus vaginal dryness severity and FSFI scores were significant (P鈥?lt;鈥?.05). CONCLUSION: Improvements observed in vulvovaginal health with ospemifene assessed by prospective vulvar-vestibular photography and other direct visual assessments support its efficacy in addition to the treatment of moderate to severe vaginal dryness due to menopause and the use of photographic and direct visual evaluations in future clinical trials. VIDEO SUMMARY: Supplemental Digital Content 1, http://links.lww.com/MENO/A415. In the experiment, the researchers used many compounds, for example, (Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol (cas: 128607-22-7Quality Control of (Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol).

(Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol (cas: 128607-22-7) belongs to alcohols. A strong base can deprotonate an alcohol to yield an alkoxide ion (R鈥昈鈭?. For example, sodamide (NaNH2), a very strong base, abstracts the hydrogen atom of an alcohol. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Quality Control of (Z)-2-(4-(4-Chloro-1,2-diphenylbut-1-en-1-yl)phenoxy)ethan-1-ol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Acuff, Heather L. et al. published their research in Animal Feed Science and Technology in 2022 | CAS: 137-08-6

Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate (cas: 137-08-6) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Name: Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate

Effects of extrusion specific mechanical energy and dryer conditions on the survival of Bacillus coagulans GBI-30, 6086 for commercial pet food applications was written by Acuff, Heather L.;Aldrich, Charles G.. And the article was included in Animal Feed Science and Technology in 2022.Name: Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate This article mentions the following:

In companion animal nutrition, probiotics (direct-fed microbials) are considered functional ingredients that benefit the gastrointestinal and immune health of the host. Bacillus coagulans GBI-30, 6086 is a spore-forming bacterial strain that has been reported to survive environmental stresses, heat processing, and extreme-pH conditions. Extrusion cooking is the most widely used method to produce com. dog and cat foods, however the thermal and mech. forces exerted during extrusion and drying present a challenge for guaranteeing the viability of live microorganisms after processing. Two experiments were conducted to determine the reduction in viability of the microorganism at graded flour inoculation levels (0, 6.2, 6.7, and 7.3 log10 colony forming units per g (CFU/g)) subjected to extrusion cooking under varied levels of specific mech. energy that were achieved by adjusting the extruder water input (10, 12, and 20 kg/h), and extruder screw speed (400, 500, and 600 rpm). A second experiment was conducted to determine the survival of the microorganism subjected to three dryer conditions (49 掳C for 10 min; 107 掳C for 16 min; and 66 掳C for 46 min). Enumeration of bacterial colony forming units was performed on pre- and post-processing samples. Extrusion data were analyzed using a general linear model using the GLIMMIX procedure, and dryer data were analyzed as a completely randomized design with one-way anal. of variance (SAS v. 9.4, SAS Institute, Inc., Cary, NC) with significance accepted at a level of 95% confidence (伪 = 0.05). The results indicate that the low SME extrusion conditions (in-barrel moisture of 35%, extruder screw speed of 400 rpm, and specific mech. energy of 129 kJ/kg) resulted in the greatest retention (P < 0.05), with a mean log10 reduction of viable spores of 0.44, 2.15, and 2.67 for the low, moderate, and severe extrusion conditions, resp. Viability of the spores through three dryer conditions were observed to be similar across all treatments. This study also demonstrated that the greatest losses of viability occurred during extrusion rather than drying, and that in-barrel moisture and extruder screw speed are two operational parameters may be modified for the optimization of Bacillus coagulans survival in extruded foods. In the experiment, the researchers used many compounds, for example, Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate (cas: 137-08-6Name: Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate).

Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate (cas: 137-08-6) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Name: Calcium (R)-3-(2,4-dihydroxy-3,3-dimethylbutanamido)propanoate

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Zhang, Jianyou et al. published their research in LWT–Food Science and Technology in 2022 | CAS: 3391-86-4

Oct-1-en-3-ol (cas: 3391-86-4) belongs to alcohols. Alkyl halides are often synthesized from alcohols, in effect substituting a halogen atom for the hydroxyl group. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Category: alcohols-buliding-blocks

Effect of pulse light on the quality of refrigerated (4掳C) large yellow croaker (Pseudosciaena crocea) was written by Zhang, Jianyou;Zhou, Guangcheng;Ji, Shengqiang;Zou, Ligen;Liang, Jianqin;Walayat, Noman;Chen, Jiang;Fei, Lyu;Ding, Yuting. And the article was included in LWT–Food Science and Technology in 2022.Category: alcohols-buliding-blocks This article mentions the following:

This study mainly analyzed the changes of quality of large yellow croaker treated by pulsed light during storage at 4掳C by studying TVC, TVB-N, TBARS, color, texture, sensory evaluation and volatile substances. The large yellow croaker was treated with different intensities (100, 200, 300, 400 and 500 J/pulse) of PL for 30 pulses. The results showed that the initial sterilization efficiency of 300 J/pulse PL group could reach to 86.27 卤 4.32%. And the TVB-N and TBARS increased at a slower rate in the 300 J/pulse group compared to the control group during storage. Furthermore, the L* and a* color parameters of 300 J/pulse group decreased more slowly than the control group. Besides that, the texture and the sensory evaluation score were also better than control group at the same storage time. The shelf life of large yellow croaker could be extended by 2-3 days after PL treatment. However, the 500 J/pulse PL group had increased lipid oxidation and resulted in some sulfur and metallic odor. To sum up, the PL technol. presented the potential effect to improve the shelf life of large yellow croaker, but it is necessary to further optimize the processing conditions of PL. In the experiment, the researchers used many compounds, for example, Oct-1-en-3-ol (cas: 3391-86-4Category: alcohols-buliding-blocks).

Oct-1-en-3-ol (cas: 3391-86-4) belongs to alcohols. Alkyl halides are often synthesized from alcohols, in effect substituting a halogen atom for the hydroxyl group. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Category: alcohols-buliding-blocks

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Maddahzadeh-Darini, Nastaran et al. published their research in Applied Organometallic Chemistry in 2022 | CAS: 873-76-7

(4-Chlorophenyl)methanol (cas: 873-76-7) belongs to alcohols. Alkyl halides are often synthesized from alcohols, in effect substituting a halogen atom for the hydroxyl group. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Application of 873-76-7

Thermo-sensitive ionic hydrogels synthesis via post quaternization cross-linking: A highly efficient reusable catalytic thermo-responsive nanoreactors was written by Maddahzadeh-Darini, Nastaran;Ghorbanloo, Massomeh;Mori, Masami;Yahiro, Hidenori. And the article was included in Applied Organometallic Chemistry in 2022.Application of 873-76-7 This article mentions the following:

Radical polymerization reactions were employed to synthesize thermo-responsive poly(N-isopropylacrylamide-co-1-vinylimidazole), p (NIPAM-co-VIm), hydrogels at room temperature A postquaternized crosslinking strategy was reported to fabricate thermo-sensitive quaternized-p (NIPAM-co-VIm) ionic hydrogels, Q-p (NIPAm-co-VIm). Combination of methods (high-resolution XPS, dynamic light scattering, and at. absorption spectroscopy) was employed to characterize the composite material. Following the concept of a “green chem.,” the oxidation of alcs./olefins was carried out in aqueous solution by using nanocomposites, p (NIPAM-co-VIm) and Q-p (NIPAM-co-VIm). It was found that the catalytic activity of the metal nanocomposite can be modulated by the lower critical solution temperature (LCST) of particles. The catalyst showed improved catalytic activity above LCST. Quaternized composites showed higher catalytic activity than unquaternized counterparts, due to their high hydrophobicity, effective interactions between substrates and catalyst, and high flexibility. In addition, we demonstrated that the catalytic activity of the nanocomposites can be tuned by the volume phase transition within the hydrogel by using the catalytic reduction of 4-nitrophenol/nitrobenzene, NP/NB, as the hydrophilic/hydrophobic substrates model. For 4-NP, with an increase in temperature from 25掳C to 35掳C (<LCST), the apparent rate constant values had a downward trend. On the contrary, for NB, this value had an upward trend. These results revealed that different changes in rate constant for 4-NP and NB with temperature should be attributed to significant differences in NP/NB affinity to interact with Ag-NPs in the hydrogel. Moreover, the catalysts could efficiently be recycled four times without losing their quality. FT-IR spectra and at. absorption spectroscopy also proved that the catalysts were recyclable, durable, and leaching-resistant. In the experiment, the researchers used many compounds, for example, (4-Chlorophenyl)methanol (cas: 873-76-7Application of 873-76-7).

(4-Chlorophenyl)methanol (cas: 873-76-7) belongs to alcohols. Alkyl halides are often synthesized from alcohols, in effect substituting a halogen atom for the hydroxyl group. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Application of 873-76-7

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts