Tag: M.W=100-150

Product Details of 105-13-5. Authors Luo, NH; Zhong, YH; Wen, HL; Shui, HL; Luo, RS in WILEY-V C H VERLAG GMBH published article about in [Luo, Nianhua; Zhong, Yuhong; Wen, Huiling; Shui, Hongling; Luo, Renshi] Gannan Med Univ, Sch Pharmaceut Sci, Ganzhou 341000, Jiangxi, Peoples R China in 2021, Cited 94. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

Ketones are of great importance in synthesis, biology, and pharmaceuticals. This paper reports an iridium complexes-catalyzed cross-coupling of alcohols via hydrogen borrowing, affording a series of alpha-alkylated ketones in high yield (86 %-95 %) and chemoselectivities (>99 : 1). This methodology has the advantages of low catalyst loading (0.1 mol%) and environmentally benign water as the solvent. Studies have shown the amount of base has a great impact on chemoselectivities. Meanwhile, deuteration experiments show water plays an important role in accelerating the reduction of the unsaturated ketones intermediates. Remarkably, a gram-scale experiment demonstrates this methodology of iridium-catalyzed cross-coupling of alcohols has potential application in the practical synthesis of alpha-alkylated ketones.

About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Luo, NH; Zhong, YH; Wen, HL; Shui, HL; Luo, RS or concate me.. Product Details of 105-13-5

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Recently I am researching about CARBOXYLIC-ACID SALTS; SECONDARY ALCOHOLS; DEHYDROGENATIVE OXIDATION; DIRECT FUNCTIONALIZATION; CROSS-COUPLINGS; COMPLEX BEARING; N-ALKYLATION; PPM LEVELS; WATER; COBALT, Saw an article supported by the SERB DSTDepartment of Science & Technology (India)Science Engineering Research Board (SERB), India; CSIR, IndiaCouncil of Scientific & Industrial Research (CSIR) – India [CRG 2019/000013, 01(2982)/19/EMR-II]; DST Inspire fellowship; UGC, IndiaUniversity Grants Commission, India; Indian Institute of Technology Delhi; DST-FISTDepartment of Science & Technology (India); IITD. Published in WILEY-V C H VERLAG GMBH in WEINHEIM ,Authors: Verma, A; Hazra, S; Dolui, P; Elias, AJ. The CAS is 105-13-5. Through research, I have a further understanding and discovery of (4-Methoxyphenyl)methanol. SDS of cas: 105-13-5

Herein, we report a simple, efficient, and sustainable method for the synthesis of alpha-alkylated ketones and quinolines using a hydrogen-borrowing strategy, which has emerged as a greener alternative in organic transformation reactions. Synthesis of a range of alpha-alkylated ketones and quinoline derivatives was achieved by using the water-soluble [Ru(8-AQ)Cl(p-cym.)]Cl-+(-) [Ru]-1 (AQ=aminoquinoline) catalyst with water as the reaction medium. By adopting this strategy, we have synthesized alpha-alkylated ketones and quinolines using ketones or secondary alcohols as starting materials and the primary alcohol as a green and naturally abundant alkylating agent.

SDS of cas: 105-13-5. Bye, fridends, I hope you can learn more about C8H10O2, If you have any questions, you can browse other blog as well. See you lster.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

An article Synthesis of the C1-C16 fragment of bryostatin for incorporation into 20,20-fluorinated analogues WOS:000599822100009 published article about ANTINEOPLASTIC AGENTS; DERIVATIVES; MACROLIDE; LEADS in [Mears, Paul R.; Thomas, Eric J.] Univ Manchester, Dept Chem, Manchester M13 9PL, Lancs, England in 2021, Cited 44. Product Details of 105-13-5. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

The stereoselective synthesis of a carboxylic acid ester corresponding to the C1 -C16 fragment of bryostatin, with 4-methoxybenzyl (PMB) protection for the 7-hydroxyl group, is reported. The key steps included a Horner-Wadsworth-Emmons reaction between (5R)-3-[ (E)-2-tri- isop ropyls ilyloxy ethylidene]-6-(4-methoxybenzyloxy)-5-triethylsilyloxyhexanal and dimethyl (4,5,6R,85)-10-hydroxy-6,8-di-O-isopropylidene 4 (4 methoxybenzyloxy)-3,3-dimethyl-2-oxodecan-1-yl phosphonate, that gave the corresponding (E)-alkene, followed by selective cleavage of the triethylsilyl ether and cyclisation to give the required 2,6-cis-disubstituted 4-[(Z)-tri-isopropylsilyloxyethylide]tetrahydropyran. Oxidation of the primary alcohol gave the corresponding carboxylic acid that was converted into the required allyl ester. (C) 2020 Elsevier Ltd. All rights reserved.

Product Details of 105-13-5. Welcome to talk about 105-13-5, If you have any questions, you can contact Mears, PR; Thomas, EJ or send Email.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Authors Reddy, PS; Reddy, NG; Serjun, VZ; Mohanty, B; Das, SK; Reddy, KR; Rao, BH in SPRINGER published article about PARTICLE-SHAPE; BAYER-PROCESS; PHYSICAL-PROPERTIES; CARBON-DIOXIDE; WASTE; NEUTRALIZATION; ADSORBENT; LIME; STABILIZATION; STRENGTH in [Reddy, Peddireddy Sreekanth; Mohanty, Bijayananda] NIT Mizoram, Dept Civil Engn, Aizawl 796012, Mizoram, India; [Reddy, Narala Gangadhara; Rao, Bendadi Hanumantha] ITT Bhubaneswar, Sch Infrastruct, Khorda 752050, Odisha, India; [Reddy, Narala Gangadhara] Shantou Univ, Dept Civil & Environm Engn, Shantou 515063, Guangdong, Peoples R China; [Serjun, Vesna Zalar] Slovenian Natl Bldg & Civil Engn Inst Slovenia, Dept Mat, Ljubljana 1000, Slovenia; [Das, Sarat Kumar] IIT ISM Dhanbad, Dept Civil Engn, Dhanbad 826004, Jharkhand, India; [Reddy, Krishna R.] Univ Illinois, Dept Civil & Mat Engn, Chicago, IL USA in 2021, Cited 205. HPLC of Formula: C8H10O2. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

In order to conserve natural resources and prevent waste generation, effective utilization of industrial wastes and/or by-products for beneficial engineering applications becomes inevitable. In order to accomplish this, extensive research studies, exploring properties and new applications of waste materials in a sustainable and environmentally friendly manner, have been initiated worldwide. Red mud (RM, also known as bauxite residue) is one of the wastes generated by the aluminium industry and its disposal and utilization have been traditionally hindered due to the extreme alkalinity (pH about 10.5-13.5). To date, no comprehensive review on various properties of RM of different origin and associated challenges in using it as a beneficial engineering material has been performed. The objective of this study is first to critically appraise the current understanding of properties of RM through a comprehensive literature review and detailed laboratory investigations conducted on Indian RM by the authors, to assess and identify the potential engineering applications, and to finally discuss associated challenges in using it in practical applications. Physical, chemical, mineralogical and geotechnical properties of RMs of different origin and production processes are reviewed. Mechanisms behind the pozzolanic reaction of RM under different chemical and mineralogical compositional conditions are discussed. Environmental concerns associated with the use of RM are also raised. Studies relevant to leachability characteristics reveal that most of the measured chemical concentrations are within the permissible regulatory limits. Overall, the review shows that RM disposal and reuse is complicated by its extreme alkalinity, which is also noticed to be influencing multiple engineering properties. But with selected pH amendments, the treated RM is found to have significant potential to be used as an effective and sustainable geomaterial. The assessment is majorly based on the characteristics of Indian RMs; hence the adaptation of the findings to other RMs should be assessed on a case-by-case basis. Moreover, field studies demonstrating the performance of RM in various engineering applications are warranted. [GRAPHICS] .

HPLC of Formula: C8H10O2. Welcome to talk about 105-13-5, If you have any questions, you can contact Reddy, PS; Reddy, NG; Serjun, VZ; Mohanty, B; Das, SK; Reddy, KR; Rao, BH or send Email.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

In 2021 TETRAHEDRON published article about ASYMMETRIC TRANSFER HYDROGENATION; ENANTIOSELECTIVE TRANSFER HYDROGENATION; MEDIATED 2+2+1 CYCLOADDITIONS; TRIMETHYLAMINE N-OXIDE; METAL-DIENE COMPLEXES; REDUCTIVE AMINATION; SELECTIVE HYDROGENATION; HIGHLY EFFICIENT; ORGANIC-SYNTHESIS; CARBON-MONOXIDE in [Coufourier, Sebastien; Ndiaye, Daouda; Gaillard, Quentin Gaignard; Bettoni, Leo; Joly, Nicolas; Mbaye, Mbaye Diagne; Gaillard, Sylvain; Renaud, Jean-Luc] Normandie Univ, CNRS, UNICAEN, LCMT,ENSICAEN, 6 Blvd Marechal Juin, F-14050 Caen, France; [Ndiaye, Daouda; Mbaye, Mbaye Diagne] Univ Assane Seck Ziguinchor, BP 523, Ziguinchor, Senegal; [Joly, Nicolas; Poater, Albert] Univ Girona, Inst Quim Computac & Catalisi IQCC, Dept Quim, C M Aurelia Capmany 69, Girona 17003, Catalonia, Spain in 2021, Cited 109. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5. Category: alcohols-buliding-blocks

A Diaminocyclopentadienone iron tricarbonyl complex has been applied in chemoselective hydrogen transfer reductions. This bifunctional iron complex demonstrated a broad applicability in mild conditions in various reactions, such as reduction of aldehydes over ketones, reductive alkylation of various functionalized amines with functionalized aldehydes and reduction of alpha,beta-unsaturated ketones into the corresponding saturated ketones. A broad range of functionalized substrates has been isolated in excellent yields with this practical procedure. (C) 2021 Elsevier Ltd. All rights reserved.

Category: alcohols-buliding-blocks. Bye, fridends, I hope you can learn more about C8H10O2, If you have any questions, you can browse other blog as well. See you lster.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Computed Properties of C8H10O2. Behera, PK; Choudhury, P; Sahu, SK; Sahu, RR; Harvat, AN; McNulty, C; Stitgen, A; Scanlon, J; Kar, M; Rout, L in [Behera, Pradyota Kumar; Choudhury, Prabhupada; Sahu, Santosh Kumar; Sahu, Rashmi Ranjan; Rout, Laxmidhar] Berhampur Univ, Dept Chem, Berhampur 760007, Orissa, India; [Rout, Laxmidhar] IISER, Dept Chem, Berhampur 760010, Odisha, India; [Harvat, Alisha N.; McNulty, Caitlin; Stitgen, Abigail; Scanlon, Joseph] Ripon Coll, Ripon, WI 54971 USA; [Kar, Manoranjan] IIT Patna, Patna 801106, Bihar, India published Oxygen Bridged Bimetallic CuMoO4 Nanocatalyst for Benzylic Alcohol Oxidation; Mechanism and DFT Study in 2021, Cited 113. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5.

Though concept of oxygen bridged bimetallic catalyst for organic reaction is not well understood. Herein, we have tried to explain the concept by experimental as well as its support by full DFT study. We report here a competent protocol for dehydrogenative oxidation of benzylic alcohol using an oxygen bridged bimetallic CuMoO4 nano catalyst. Careful demonstration reveals that oxidation is not effective either with mono-metallic Cu (II) or Mo(VI); instead combination of both the metals through the oxygen bridge [Cu-O-Mo] unexpectedly and interestingly catalyzed the reaction efficiently. The new concept is strongly supported by computational DFT study. DFT study reveals dehydrogenative oxidation is preferred at copper centre over molybdenum and aromatic benzyl alcohols are greatly stabilised. Interaction barrier energy of monometallic CuO and MoO3 catalyst is much higher than bimetallic CuMoO4. Hydrogen transfer has larger barrier heights for CuO (31.5 kcal/mol) and MoO3 (40.3 kcal/mol) than bimetallic CuMoO4.

About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Behera, PK; Choudhury, P; Sahu, SK; Sahu, RR; Harvat, AN; McNulty, C; Stitgen, A; Scanlon, J; Kar, M; Rout, L or concate me.. Computed Properties of C8H10O2

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

COA of Formula: C8H10O2. Authors Sait, N; Aliouane, N; Toukal, L; Hammache, H; Al-Noaimi, M; Helesbeux, JJ; Duval, O in ELSEVIER published article about in [Sait, N.; Aliouane, N.; Hammache, H.] Univ Bejaia, Dept Genie Proc, Lab Electrochim Corros & Valorisat Energet, Bejaia 06000, Algeria; [Toukal, L.] Univ Ferhat Abbas Setif 1, Dept Genie Proc, Lab Electrochim Ingn Mol & Catalyse Redox, Setif, Algeria; [Al-Noaimi, M.] Hashemite Univ, Fac Sci, Dept Chem, POB 330127, Zarqa 13133, Jordan; [Helesbeux, J. J.; Duval, O.] Univ Angers, Univ Bretagne Loire, SFR QUASAV 4207, Lab SONAS,EA921, 42 Rue Georges Morel, Beaucouze, France in 2021, Cited 83. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

The inhibition performance of the newly synthesized Ethylene bis [(2-hydroxy-5,1,3-phenylene) bismethylene] tetraphosphonic acid (ETPA) toward carbon steel in 3% NaCl was investigated at different concentrations using potentiodynamic polarization (PDP) and impedance spectroscopy (EIS) methods. It was found that the inhibition capability was increased with increasing inhibitor dose and reach 92% at 10(-3) mol/L. Also, Polarization curves showed that ETPA acts as a mixed type inhibitor with predominantly control of anodic reaction. The new inhibitor was investigated by different spectroscopic methods such as H-1, C-13 and (PNMR)-P-31. The quantum parameters such as absolute electronegativity (chi), energy gap Delta(E) (E-HOMO-E-LUMO), global softness (sigma), global hardness (eta), electrophilicity index (omega) and the number of transfer electrons (Delta N) are calculated by density functional theory (DFT). The experimental also correlated with density functional theory results. The calculations show that ETPA has high density of negative charge located on the oxygen atoms of the phosphonate group facilitating the adsorption of ETPA on the surface of carbon steel. The inhibition efficiency of ETPA was discussed in terms of blocking of electrode surface by adsorption of ETPA molecules through active centers. The adsorption of ETPA on the surface of carbon steel obeyed the Langmuir isotherm paradigm. (C) 2021 Elsevier B.V. All rights reserved.

COA of Formula: C8H10O2. Welcome to talk about 105-13-5, If you have any questions, you can contact Sait, N; Aliouane, N; Toukal, L; Hammache, H; Al-Noaimi, M; Helesbeux, JJ; Duval, O or send Email.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Authors Wang, ZH; Wang, H; Wang, H; Li, L; Zhou, MD in AMER CHEMICAL SOC published article about in [Wang, Zhao-Hui; Wang, He; Wang, Hua; Li, Lei; Zhou, Ming-Dong] Liaoning Shihua Univ, Sch Chem & Mat Sci, Fushun 113001, Peoples R China in 2021, Cited 63. Name: (4-Methoxyphenyl)methanol. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

In this work, ruthenium(II)-catalyzed C-C/C-N annulation of 2-arylquinazolinones with vinylene carbonate is reported to synthesize fused quinazolinones. This catalytic system tolerates a wide range of substrates with excellent functional-group compatibility. In this transformation, the vinylene carbonate acts as an ethynol surrogate without any external oxidant involved. Furthermore, preliminary mechanistic studies were conducted, and a plausible catalytic cycle was also proposed.

Bye, fridends, I hope you can learn more about C8H10O2, If you have any questions, you can browse other blog as well. See you lster.. Name: (4-Methoxyphenyl)methanol

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Application In Synthesis of (4-Methoxyphenyl)methanol. In 2021 COLLOID SURFACE A published article about PHOTOCATALYTIC ACTIVITY; AEROBIC OXIDATION; TITANIUM-DIOXIDE; FACILE SYNTHESIS; ANATASE TIO2; BENZALDEHYDE; ENHANCEMENT; HETEROSTRUCTURE; NANOCOMPOSITES; NANOPARTICLES in [Japa, Mattawan; Phasayavan, Witchaya] Chiang Mai Univ, Grad Sch, Chiang Mai 50200, Thailand; [Japa, Mattawan; Phasayavan, Witchaya; Inceesungvorn, Burapat] Chiang Mai Univ, Fac Sci, Ctr Excellence Innovat Chem PERCH CIC, Ctr Excellence Mat Sci & Technol,Dept Chem, Chiang Mai 50200, Thailand; [Japa, Mattawan; Nattestad, Andrew; Chen, Jun] Univ Wollongong, ARC Ctr Excellent Electromat Sci, Intelligent Polymer Res Inst, Australian Inst Innovat Mat, Wollongong, NSW 2522, Australia; [Tantraviwat, Doldet] Chiang Mai Univ, Fac Engn, Dept Elect Engn, Chiang Mai 50200, Thailand in 2021, Cited 52. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5.

N-doped TiO2, denoted as T_400, was prepared simply by the facile thermal hydrolysis of TiOSO4 using NH4OH as both a precipitating agent and a nitrogen source. Compared to TiO2 without nitrogen doping, T_400 provides superior photocatalytic activity toward the selective oxidation of benzyl alcohol and benzylamine under visible light irradiation, with > 85 % conversion and > 95 % selectivity to benzaldehyde and N-benzylidenebenzylamine products, respectively. The increased photoactivity of T_400 is ascribed to enhanced visible-light absorption and efficient photogenerated charge transfer and separation as supported by UV-vis DRS, photoelectrochemical and VB-XPS results. The catalyst can tolerate the presence of substituent groups in benzyl alcohol and benzelamine molecules as > 80 % conversion and > 95 % selectivity are still achieved, which expands the scope of substrates and catalyst utilization. Band energy level of N-doped TiO2 compared to that of undoped TiO2 is determined using Mott-Schottky and UV-vis DRS measurements. Possible mechanisms for the formation of benzaldehyde and N-benzylidenebenzylamine over N-doped TiO2 are proposed. This work presents a simple synthesis of N-doped TiO2, using a low-cost and easily handled inorganic titanium salt instead of air/moisture-sensitive alkoxide precursors and reveals its potential application toward photocatalytic synthesis of organic fine chemicals under visible light.

Bye, fridends, I hope you can learn more about C8H10O2, If you have any questions, you can browse other blog as well. See you lster.. Application In Synthesis of (4-Methoxyphenyl)methanol

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Authors Bellardita, M; Yurdakal, S; Tek, BS; Degirmenci, C; Palmisano, G; Loddo, V; Palmisano, L; Soria, J; Sanz, J; Augugliaro, V in ELSEVIER SCI LTD published article about ORGANIC-CHEMISTRY; AROMATIC ALCOHOLS; AQUEOUS GLUCOSE; BENZOIC-ACID; WATER; HYDROCARBONS; DEGRADATION in [Bellardita, Marianna; Loddo, Vittorio; Palmisano, Leonardo; Augugliaro, Vincenzo] Univ Palermo, Dipartimento Ingn, Schiavello Grillone Photocatalysis Grp, Viale Sci,Ed 6, I-90128 Palermo, Italy; [Yurdakal, Sedat; Tek, Bilge Sina] Afyon Kocatepe Univ, Fen Edebiyat Fak, Kimya Bolumu, Ahmet Necdet Sezer Kampusu, TR-03200 Afyon, Turkey; [Degirmenci, Caglar] Eskisehir Tekn Univ, Fen Fak, Kimya Bolumu, Yunus Emre Kampusu, TR-26470 Eskisehir, Turkey; [Palmisano, Giovanni] Khalifa Univ Sci & Technol, Dept Chem Engn, POB 127788, Abu Dhabi, U Arab Emirates; [Palmisano, Giovanni] Khalifa Univ Sci & Technol, Res & Innovat Ctr CO2 & H2, POB 127788, Abu Dhabi, U Arab Emirates; [Soria, Javier] CSIC, Inst Catalisis & Petroleoquim, C Marie Curie 2, Madrid 28049, Spain; [Sanz, Jesus] CSIC, Inst Ciencia Mat, Madrid 28049, Spain in 2021, Cited 38. Quality Control of (4-Methoxyphenyl)methanol. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

The influence of pH on the photocatalytic partial oxidation of 4-methoxybenzyl alcohol (MBA) and vanillyl alcohol (VA) to their corresponding aldehydes in aqueous suspension under UVA irradiation was investigated by using poorly crystalline home-prepared and crystalline commercial TiO2 (BDH, Merck and Degussa P25) photocatalysts. The results clearly show as tuning pH can strongly impart selectivity and activity to photocatalytic processes which are often quite unselective in aqueous suspensions. It was found that pH effect on reaction rate and product selectivity strongly depended on TiO2 crystallinity and substrate type. In the case of MBA oxidation, photoreactivity and selectivity were very high at low pH values for all of TiO2 catalysts, and the crystalline samples showed to be more active than the poorly crystalline ones. At pH= 1 the photoactivity of Degussa P25 was the highest one, and 88% selectivity at 50% conversion was determined. At acidic pH values, selectivity and activity were higher in the presence of HCl than H2SO4 or H3PO4. For VA oxidation, high selectivity values were obtained at high pH’s for all of the samples, and the crystalline samples showed higher activity at the alkaline pH values with respect to that observed at the acidic ones. Experiments starting from the obtained products, that are p-anisaldehyde and vanillin, showed that the selectivity depends on the resistance of those compounds to be subjected to further oxidation under the experimental conditions used.

Welcome to talk about 105-13-5, If you have any questions, you can contact Bellardita, M; Yurdakal, S; Tek, BS; Degirmenci, C; Palmisano, G; Loddo, V; Palmisano, L; Soria, J; Sanz, J; Augugliaro, V or send Email.. Quality Control of (4-Methoxyphenyl)methanol

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts