Alcohols-buliding-blocks

Simple alcohols are found widely in nature. Ethanol is the most prominent because it is the product of fermentation, a major energy-producing pathway. 647-42-7, formula is C8H5F13O, Other simple alcohols, chiefly fusel alcohols, are formed in only trace amounts. More complex alcohols however are pervasive, as manifested in sugars, some amino acids, and fatty acids. , Recommanded Product: 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol

Yu, Shuling;Ren, Jing;Lv, Zhenxia;Li, Rui;Zhong, Yuyan;Yao, Wu;Yuan, Jintao research published 《 Prediction of the endocrine-disrupting ability of 49 per- and polyfluoroalkyl substances: In silico and epidemiological evidence》, the research content is summarized as follows. The toxic effects of per- and polyfluoroalkyl substances (PFASs) on humans are mediated by nuclear hormone receptors (NHRs). However, data on the interaction of PFASs and NHRs is limited. Endocrine Disruptome, an inverse docking tool, was used in this study to simulate the docking of 49 common PFASs with 14 different types of human NHRs. According to the findings, 25 PFASs have a high or moderately high probability of binding to more than five NHRs, with androgen receptor (AR) and mineralocorticoid receptor (MR) being the most likely target NHRs. Mol. docking analyses revealed that the binding modes of PFASs with the two NHRs were similar to those of their corresponding co-crystallized ligands. PFASs, in particular, may disrupt the endocrine system by binding to MR. This finding is consistent with epidemiol. research that has linked PFASs to MR-related diseases. Our findings may contribute to a better understanding of the health risks posed by PFASs.

647-42-7, 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol, also known as 1H,1H, 2H, 2H-Tridecafluoro-1-n-octanol , is a useful research compound. Its molecular formula is C8H5F13O and its molecular weight is 364.1 g/mol. The purity is usually 95%.

1H,1H, 2H, 2H-Tridecafluoro-1-n-octanol is a material used to improve nanotube composites. It is also used in the synthesis of a recyclable fluorous hydrazine carbothioate compound with NCS to catalyze the acetalization of aldehydes.

1H,1H,2H,2H-Tridecafluoro-1-n-octanol is a potent and selective halogenated hydrocarbon. It binds to DNA at the dinucleotide phosphate site, which is an important site for polymerase chain reaction (PCR) activation. 1HFN has been shown to be more effective than other halogenated hydrocarbons in vitro assays on rat liver microsomes. It has been used as an additive in wastewater treatment to remove organic contaminants and metal ions. In vivo studies have been carried out in CD-1 mice to determine the effects of 1HFN on the liver and kidneys; these studies showed no toxicological effects on these organs. 1HFN also has been shown to inhibit enzymes such as cytochrome P450 and monoamine oxidase B that are involved in drug metabolism and may lead to adverse reactions with drugs metabolized by these enzymes., Recommanded Product: 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Some low molecular weight alcohols of industrial importance are produced by the addition of water to alkenes. 72824-04-5, formula is C9H17BO2, Ethanol, isopropanol, 2-butanol, and tert-butanol are produced by this general method. Two implementations are employed, the direct and indirect methods. Recommanded Product: 2-Allyl-4,4,5,5-tetramethyl-1,3,2-dioxaborolane

Yu, Liyang;Zhang, Meiling;Tang, Jie;Li, Ruipeng;Xu, Xiaopeng;Peng, Qiang research published 《 Wide Bandgap Perylene Diimide Derivatives as an Effective Third Component for Parallel Connected Ternary Blend Polymer Solar Cells》, the research content is summarized as follows. Constructing a ternary blend active layer for polymer solar cells (PSCs) is a widely explored approach to achieve a high power conversion efficiency (PCE). To achieve this, multiple approaches have been explored for dual-acceptor PSCs including acceptor alloy and acceptor cascade. Parallel connection is another working mechanism of ternary blends with the advantage of large freedom in the selection of materials with largely different absorption ranges. Here, we purposely designed two propeller-like perylene diimide (PDI) derivatives, TT-PDI and TZ-PDI, with different central cores and selected one as the third component to be added into a PM6:Y6 blend. The highest PCE of 17.52% was obtained with 10% of Y6 replaced by TZ-PDI in the ternary blend. To our knowledge, this is the first report of a PDI derivative to be added into a PM6:Y6 blend with significantly increased device performance. The improved PCE was ascribed to the high photon absorption due to the wide bandgap and amorphous structure of TZ-PDI, which paved a functional parallel charge generation route without interfering with the nanostructure of the PM6:Y6 blend. This work demonstrated the parallel connected ternary blend as a viable route to construct efficient PSCs and a chem. designing strategy for a suitable third component in ternary blends.

72824-04-5, Allylboronic acid pinacol ester is a useful research compound. Its molecular formula is C9H17BO2 and its molecular weight is 168.04 g/mol. The purity is usually 95%.
Allylboronic acid pinacol ester is an allylation reagent that is used to produce aldehydes from ketones. It reacts with water, yielding the desired product and formaldehyde as a byproduct. The reaction proceeds through a sequence of steps, in which the boronate ester first reacts with water to form an allylboronate ion and hydrogen gas. This intermediate then reacts with potassium t-butoxide to produce the desired allyl alcohol and potassium borohydride. Finally, the palladium complex catalyst reduces the carbonyl group of the starting material, converting it into an aldehyde. Allylboronic acid pinacol ester is commercially available as a white solid, but can also be synthesized from 2-chloro-5-pinacolylborane (pinacol) in high yield using catalytic cross coupling reactions., Recommanded Product: 2-Allyl-4,4,5,5-tetramethyl-1,3,2-dioxaborolane

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Simple alcohols are found widely in nature. Ethanol is the most prominent because it is the product of fermentation, a major energy-producing pathway. 647-42-7, formula is C8H5F13O, Other simple alcohols, chiefly fusel alcohols, are formed in only trace amounts. More complex alcohols however are pervasive, as manifested in sugars, some amino acids, and fatty acids. , COA of Formula: C8H5F13O

Yu, Binhai;Huang, Zijian;Fang, Dong;Yu, Shudong;Fu, Ting;Tang, Yong;Li, Zongtao research published 《 Biomimetic Porous Fluoropolymer Films with Brilliant Whiteness by Using Polymerization-Induced Phase Separation》, the research content is summarized as follows. Inspired by the Cyphochilus scale with extreme whiteness, fluoropolymer is used as the matrix to prepare highly scattering porous polymer films through polymerization-induced phase separation (PIPS) method. The mixture used for the PIPS technique contains a fluoride monomer, a UV photoinitiator, and porogens (cyclohexanol and perfluorooctanol). By carefully tuning the mixture parameters (cyclohexanol-perfluorooctanol and monomer-porogen weight ratios), the porous morphol. can be well tailored, which induces different scattering performances. With an optimized formulation (50 wt% monomer, 25 wt% cyclohexanol, and 25 wt% perfluorooctanol), the porous film with a thickness of 55μm can achieve an average total reflectance of ~90%, featuring a measured transport mean free path of 1.3-1.7μm (comparable to the 1.5μm of the benchmark Cyphochilus scale). Further, the porous films are applied to the light-emitting diode (LED) device and it is demonstrated that they can effectively improve the light extraction efficiency of the LED and thus enhance the luminous performance. Due to the simplicity, cost-effectiveness, and scalability of the PIPS method, the as-developed porous fluoropolymer films with such excellent scattering ability can find many potential applications not only in the field of optoelectronics, but also in various complex scenarios, such as daytime passive radiative cooling.

COA of Formula: C8H5F13O, 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol, also known as 1H,1H, 2H, 2H-Tridecafluoro-1-n-octanol , is a useful research compound. Its molecular formula is C8H5F13O and its molecular weight is 364.1 g/mol. The purity is usually 95%.

1H,1H, 2H, 2H-Tridecafluoro-1-n-octanol is a material used to improve nanotube composites. It is also used in the synthesis of a recyclable fluorous hydrazine carbothioate compound with NCS to catalyze the acetalization of aldehydes.

1H,1H,2H,2H-Tridecafluoro-1-n-octanol is a potent and selective halogenated hydrocarbon. It binds to DNA at the dinucleotide phosphate site, which is an important site for polymerase chain reaction (PCR) activation. 1HFN has been shown to be more effective than other halogenated hydrocarbons in vitro assays on rat liver microsomes. It has been used as an additive in wastewater treatment to remove organic contaminants and metal ions. In vivo studies have been carried out in CD-1 mice to determine the effects of 1HFN on the liver and kidneys; these studies showed no toxicological effects on these organs. 1HFN also has been shown to inhibit enzymes such as cytochrome P450 and monoamine oxidase B that are involved in drug metabolism and may lead to adverse reactions with drugs metabolized by these enzymes., 647-42-7.

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Synthetic Route of 24034-73-9, In chemistry, an alcohol is a type of organic compound that carries at least one hydroxyl functional group (−OH) bound to a saturated carbon atom. 24034-73-9, name is (2E,6E,10E)-3,7,11,15-Tetramethylhexadeca-2,6,10,14-tetraen-1-ol, An important class of alcohols, of which methanol and ethanol are the simplest examples, includes all compounds which conform to the general formula CnH2n+1OH.

Yin, Yue;Qiu, Yan-Wei;Huang, Juan;Tobe, Stephen S.;Chen, Shan-Shan;Kai, Zhen-Peng research published 《 Enzymes in the juvenile hormone biosynthetic pathway can be potential targets for pest control》, the research content is summarized as follows. A review. BACKGROUND : Discovery of novel insecticides and targets has received global attention in recent years. Ten genes coding for enzymes involved in the juvenile hormone biosynthetic pathway of Manduca sexta were studied as potential insecticide targets. RESULTS : We determined the expression of genes encoding some critical enzymes in the JH biosynthetic pathway. Farnesol dehydrogenase (FOLD), Juvenile hormone acid O-methyltransferase (JHAMT) and Juvenile hormone epoxidase (CYP15C1) were selected as the candidate targets based on gene expression results. RNAi silencing and enzyme inhibitor tests were performed to validate whether these candidate genes could be the potential insecticide targets. The down-regulation of FOLD, JHAMT and CYP15C1 resulted in a 68%, 82% and 79% reduction in the rates of JH biosynthesis in vitro, resp. In addition, RNA interference and inhibitor studies of these enzymes following oral administration demonstrated the potential application in pest management, with respect to high mortality and effects on growth. CONCLUSION : Based on our study, FOLD, JHAMT and CYP15C1 could be potential targets for pest control as a consequence of their important roles in insect development. © 2019 Society of Chem. Industry.

24034-73-9, Geranylgeraniol is a diterpenoid that is hexadeca-2,6,10,14-tetraene substituted by methyl groups at positions 3, 7, 11 and 15 and a hydroxy group at position 1. It has a role as a plant metabolite, a volatile oil component and an antileishmanial agent. It is a diterpenoid and a polyprenol.

Geranylgeraniol, a precursor to geranylgeranylpyrophosphate, is an intermediate in the mevalonate pathway. Geranylgeraniol has been shown to prevent bone re-absorption, inhibition of osteoclast formation, and kinase activation in vitro. When working with statins, Geranylgeraniol can reduce the toxicity without inhibiting the cholesterol-producing effects. Geranylgeraniol has been documented to counteract the effects of fluvastatin by inhibiting activation of caspase-1 and production of IL-1. Additionally Geranylgeraniol has been found to induce apoptosis in HL-60 cells.
, Synthetic Route of 24034-73-9

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Simple alcohols are found widely in nature. Ethanol is the most prominent because it is the product of fermentation, a major energy-producing pathway. 527-07-1, formula is C6H11NaO7, Other simple alcohols, chiefly fusel alcohols, are formed in only trace amounts. More complex alcohols however are pervasive, as manifested in sugars, some amino acids, and fatty acids. , SDS of cas: 527-07-1

Ye, Qianqian;Han, Yufei;Liu, Tao;Bai, Yue;Chen, Yingjian;Li, Jianzhang;Shi, Sheldon Q. research published 《 Magnesium oxychloride cement reinforced via D-gluconic acid sodium salt for slow-curing, with enhanced compressive strength and water resistance》, the research content is summarized as follows. Magnesium oxychloride cement (MOC) has the advantages of low-carbon emission, reducing the magnesium chloride waste, and lack of humid curing. However, the MOC has not been widely utilized yet due to the poor water resistance and the short setting time at high ambient temperatures Herein, a simple and low-cost approach was developed through incorporating D-gluconic acid sodium salt into the MOC. After adding 1.4 wt% D-gluconic acid sodium salt, the initial and final setting time were extended to 257 min and 421 min, resp., compared to that of unmodified MOC (92 min and 192 min). Based on the XPS anal., the rod-like phase 5 (5 Mg(OH)2·MgCl2·8H2O) in the MOC was converted into the gel-like phase 5 through the chelation between D-gluconic acid sodium salt and phase 5. The gel-like structures were evidently observed in the MOC pores (especially after immersing in water), and they efficiently hinder the moisture penetrating into internal structure of the MOC. Subsequently, the softening coefficient was enhanced from 0.38 to 0.91 when the D-gluconic acid sodium salt content was increased from 0% to 1.4%. In comparison to the unmodified MOC, 0.6 wt% of D-gluconic acid sodium salt could enhance the compressive strength by 24.6% after curing for 7 days. When the D-gluconic acid sodium salt content increased to over 0.6%, the compressive strength decreased. Meanwhile, the anal. of phase components proved that the phase 5 content of the modified MOC specimens remained unchanged or even increased after immersing into the water, establishing protection of the gel-like structure on the phase 5.

527-07-1, Sodium Gluconate is the sodium salt of gluconic acid with chelating property. Sodium gluconate chelates and forms stable complexes with various ions, preventing them from engaging in chemical reactions.
Sodium gluconate is an organic sodium salt having D-gluconate as the counterion. It has a role as a chelator. It contains a D-gluconate.
D-Gluconic acid sodium salt is a glycol ether that is used as an injection solution. It has been shown to have antibacterial efficacy against wild-type strains of bacteria such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. The in vitro antimicrobial action of D-gluconic acid sodium salt was found to be due to its ability to inhibit bacterial growth by interfering with the synthesis of DNA. D-gluconic acid sodium salt also has been shown to have antihypertensive effects in rats through the inhibition of angiotensin II type 1 receptor (AT1) signaling pathway and erythrocyte proliferation. This drug also has been shown to bind benzalkonium chloride and x-ray diffraction data show that it is crystalline in nature. The analytical method for determining the concentration of D-gluconic acid sodium salt is by electrochemical impedance, SDS of cas: 527-07-1

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Some low molecular weight alcohols of industrial importance are produced by the addition of water to alkenes. 7748-36-9, formula is C3H6O2, Ethanol, isopropanol, 2-butanol, and tert-butanol are produced by this general method. Two implementations are employed, the direct and indirect methods. Recommanded Product: Oxetan-3-ol

Ye, Danfeng;Liu, Zhiyuan;Chen, Hao;Sessler, Jonathan L.;Lei, Chuanhu research published 《 Cesium Carbonate Catalyzed Esterification of N-Benzyl-N-Boc-amides under Ambient Conditions》, the research content is summarized as follows. A general activated amide to ester transformation catalyzed by Cs₂CO₃, is reported. Using this approach, esterification proceeds under relatively mild conditions and without the need for a transition metal catalyst. This method exhibits broad substrate scope and represents a practical alternative to existing esterification strategies. The synthetic utility of this protocol is demonstrated via the facile synthesis of crown ether derivatives and the late-stage modification of a representative natural product and several sugars in reasonable yields.

Recommanded Product: Oxetan-3-ol, Oxetan-3-ol is a useful research compound. Its molecular formula is C3H6O2 and its molecular weight is 74.08 g/mol. The purity is usually 95%.
Oxetan-3-ol is a synthetic hydroxy compound with the chemical formula C6H12O3. It is an organic solvent that can be used in reactions involving vinyl alcohol and oxetane, such as ring-opening polymerization and cationic polymerization. Oxetan-3-ol has also been shown to react with ethyl bromoacetate to form the corresponding oxetane, which can be used as a bioisostere for chloropropane, a potential replacement for chlorofluorocarbons., 7748-36-9.

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Application In Synthesis of 7748-36-9, In chemistry, an alcohol is a type of organic compound that carries at least one hydroxyl functional group (−OH) bound to a saturated carbon atom. 7748-36-9, name is Oxetan-3-ol, An important class of alcohols, of which methanol and ethanol are the simplest examples, includes all compounds which conform to the general formula CnH2n+1OH.

Yates, Peter;Szabo, Arthur G. research published 《 Photochemical synthesis of 3-oxetanols》, the research content is summarized as follows. Irradiation of 1% solution of RCOCH₂OCH₂R’ (I, R = Ph, R’ = H) (II) in C₆H₆ (N atm.) 12 hrs. with a 450-w., H₂O-cooled, high pressure Hg lamp yielded 29% 3-phenyl-3-oxetanol (III, R = Ph, R’ = H) (IV), m. 55-6° The N.M.R. signal at 6.28 ppm. was absent after treatment with D₂O. Treatment of 3-oxetanone with PhMgBr followed by decomposition with aqueous NH₄Cl also yielded IV. Identification of BzMe and H₂CO among the products of the photochem. reaction showed that the synthesis of IV was accompanied by a Norrish type II cleavage of the alkoxy ketone (Srinivasan, CA 57, 7091i). Similar irradiation of I (R = Ph, R’ = Me) yielded 34% III (R = Ph, R’ = Me) (V), b_0.5 75-80°, n²⁵_D 1.5392; V consisted largely or entirely of a single diastereoisomeric form. Irradiation of I (R = tert-Bu, R’ = H) yielded only 5% III (R = tert-Bu, R’ = H), m. 118-19.5° (after sublimation), indicating that the reaction is not restricted to aromatic ketones.

Application In Synthesis of 7748-36-9, Oxetan-3-ol is a useful research compound. Its molecular formula is C3H6O2 and its molecular weight is 74.08 g/mol. The purity is usually 95%.
Oxetan-3-ol is a synthetic hydroxy compound with the chemical formula C6H12O3. It is an organic solvent that can be used in reactions involving vinyl alcohol and oxetane, such as ring-opening polymerization and cationic polymerization. Oxetan-3-ol has also been shown to react with ethyl bromoacetate to form the corresponding oxetane, which can be used as a bioisostere for chloropropane, a potential replacement for chlorofluorocarbons., 7748-36-9.

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Category: alcohols-buliding-blocks, In chemistry, an alcohol is a type of organic compound that carries at least one hydroxyl functional group (−OH) bound to a saturated carbon atom. 72824-04-5, name is 2-Allyl-4,4,5,5-tetramethyl-1,3,2-dioxaborolane, An important class of alcohols, of which methanol and ethanol are the simplest examples, includes all compounds which conform to the general formula CnH2n+1OH.

Yao, Lingling;Zhu, Defeng;Wang, Lei;Liu, Jie;Zhang, Yicheng;Li, Pinhua research published 《 Visible-light-induced chemoselective reactions of quinoxalin-2(1H)-ones with alkylboronic acids under air/N₂ atmosphere》, the research content is summarized as follows. A visible-light-induced chemoselective reactions of quinoxalin-2(1H)-ones with alkylboronic acids in the presence of air (O₂) and N₂ atmosphere was developed under transition-metal free conditions, provided 3-alkylquinoxalin-2(1H)-ones and 3,4-dihydroquinoxalin-2(1H)-ones, resp. The overall strategy accommodated a broad scope of substituted quinoxalin-2(1H)-ones and alkylboronic acids with good to excellent product yields.

Category: alcohols-buliding-blocks, Allylboronic acid pinacol ester is a useful research compound. Its molecular formula is C9H17BO2 and its molecular weight is 168.04 g/mol. The purity is usually 95%.
Allylboronic acid pinacol ester is an allylation reagent that is used to produce aldehydes from ketones. It reacts with water, yielding the desired product and formaldehyde as a byproduct. The reaction proceeds through a sequence of steps, in which the boronate ester first reacts with water to form an allylboronate ion and hydrogen gas. This intermediate then reacts with potassium t-butoxide to produce the desired allyl alcohol and potassium borohydride. Finally, the palladium complex catalyst reduces the carbonyl group of the starting material, converting it into an aldehyde. Allylboronic acid pinacol ester is commercially available as a white solid, but can also be synthesized from 2-chloro-5-pinacolylborane (pinacol) in high yield using catalytic cross coupling reactions., 72824-04-5.

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Category: alcohols-buliding-blocks, In chemistry, an alcohol is a type of organic compound that carries at least one hydroxyl functional group (−OH) bound to a saturated carbon atom. 7748-36-9, name is Oxetan-3-ol, An important class of alcohols, of which methanol and ethanol are the simplest examples, includes all compounds which conform to the general formula CnH2n+1OH.

Yang, Wen;Wang, Zhaobin;Sun, Jianwei research published 《 Enantioselective Oxetane Ring Opening with Chloride: Unusual Use of Wet Molecular Sieves for the Controlled Release of HCl》, the research content is summarized as follows. In the presence of a nonracemic spirobiindanephosphoric acid, 3-substituted oxetanes underwent enantioselective ring opening and desymmetrization with chloride generated in situ from trimethoxychlorosilane and water in the presence of 5Å mol. sieves in benzene to yield nonracemic chloropropanols such as (R)-HOCH₂CHRCH₂Cl [R = Ph, 4-MeC₆H₄, 2-MeOC₆H₄, 3-BrC₆H₄, 3-F₃CC₆H₄, 4-F₃CC₆H₄, 2-naphthyl, 2-benzofuranyl, (E)-PhCH:CH, PhCH₂, PhCH₂O] as highly functionalized three-carbon building blocks. The excellent enantiocontrol is enabled not only by the use of the new spirobiindanephosphoric acid catalyst, but also by the unusual use of wet mol. sieves for the controlled release of HCl.

7748-36-9, Oxetan-3-ol is a useful research compound. Its molecular formula is C3H6O2 and its molecular weight is 74.08 g/mol. The purity is usually 95%.
Oxetan-3-ol is a synthetic hydroxy compound with the chemical formula C6H12O3. It is an organic solvent that can be used in reactions involving vinyl alcohol and oxetane, such as ring-opening polymerization and cationic polymerization. Oxetan-3-ol has also been shown to react with ethyl bromoacetate to form the corresponding oxetane, which can be used as a bioisostere for chloropropane, a potential replacement for chlorofluorocarbons., Category: alcohols-buliding-blocks

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In general, the hydroxyl group makes alcohols polar. 141699-55-0, formula is C8H15NO3, Because of hydrogen bonding, alcohols tend to have higher boiling points than comparable hydrocarbons and ethers. Application of C8H15NO3

Yang, Shyh-Ming;Yasgar, Adam;Miller, Bettina;Lal-Nag, Madhu;Brimacombe, Kyle;Hu, Xin;Sun, Hongmao;Wang, Amy;Xu, Xin;Nguyen, Kimloan;Oppermann, Udo;Ferrer, Marc;Vasiliou, Vasilis;Simeonov, Anton;Jadhav, Ajit;Maloney, David J. research published 《 Discovery of NCT-501, a Potent and Selective Theophylline-Based Inhibitor of Aldehyde Dehydrogenase 1A1 (ALDH1A1)》, the research content is summarized as follows. Aldehyde dehydrogenases (ALDHs) metabolize reactive aldehydes and possess important physiol. and toxicol. functions in areas such as CNS, metabolic disorders, and cancers. Increased ALDH (e.g., ALDH1A1) gene expression and catalytic activity are vital biomarkers in a number of malignancies and cancer stem cells, highlighting the need for the identification and development of small mol. ALDH inhibitors. A new series of theophylline-based analogs as potent ALDH1A1 inhibitors is described. The optimization of hits identified from a quant. high throughput screening (qHTS) campaign led to analogs with improved potency and early ADME properties. This chemotype exhibits highly selective inhibition against ALDH1A1 over ALDH3A1, ALDH1B1, and ALDH2 isoenzymes as well as other dehydrogenases such as HPGD and HSD17β4. Moreover, the pharmacokinetic evaluation of selected analog (NCT-501) is also highlighted.

141699-55-0, Tert-butyl 3-hydroxyazetidine-1-carboxylate is a useful research compound. Its molecular formula is C8H15NO3 and its molecular weight is 173.21 g/mol. The purity is usually 95%.

Tert-butyl 3-hydroxyazetidine-1-carboxylate has been shown to be a good substrate for the preparation of N-protected amino alcohols and amines by the process of reductive amination. In this synthesis, tert-butyl azetidinium chloride is used as a catalyst in the reaction with sodium hydroxide. The tert-butyl group can be removed using ammonium hydroxide in the presence of a base such as triethylamine. This reaction can be performed on a large scale, making it useful in the manufacture of pharmaceuticals. The efficiency and solubility of this process make it suitable for use as an introduction to other processes involving N-protected amino alcohols or amines., Application of C8H15NO3

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts