Alcohols-buliding-blocks

On May 27, 2022, Shubhashish, Shubhashish; Amin, Alireza S.; Dang, Yanliu; Karasik, Sarah J.; Khanna, Harshul S.; Suib, Steven L. published an article.Reference of Pentane-1,5-diol The title of the article was Synthesis of Highly Porous Metal Oxide Nanoparticles for Adsorption Applications. And the article contained the following:

Herein, we report a general and straightforward synthesis method for large-pore highly mesoporous metal oxide nanoparticles via a modified inverse micelle formation. The role of diols as solvents has been demonstrated and extended to other metal oxides using ethylene glycol. After scanning most of the metals from the periodic table, magnesium and calcium from the s-block; tin from the p-block; vanadium, nickel, zinc, zirconium, and hafnium from the d-block; and lanthanum and cerium from the f-block elements, all these have been successfully synthesized as large-pore-diameter metal oxides. Because of thermodn. stability of chelate formation, ethylene glycol, 1,3-propanediol, 1,4-butanediol, and 1,5-pentanediol give a higher pore diameter, whereas a further increase in the diol carbon chain (1,6-hexanediol and 1,12-dodecanediol) leads to pore contraction. By varying the synthesis temperature, the effect of viscosity on the pore diameter has also been demonstrated. Potential applications of oxides of magnesium have been tested for carbon dioxide capture and adsorption of macromols. such as proteins and lipids and small mols. such as curcumin, dopamine, and sucrose. As predicted, larger-pore-diameter and higher-pore-volume mesoporous magnesium oxide shows higher carbon dioxide capture and adsorption compared to com. magnesium oxide. A mechanism for the higher pore diameters of mesoporous metal oxide nanomaterials has been proposed based on the results and previous reported literature studies. The experimental process involved the reaction of Pentane-1,5-diol(cas: 111-29-5).Reference of Pentane-1,5-diol

The Article related to mesoporous particle oxide adsorption catalyst glycol, Surface Chemistry and Colloids: Solid-Liquid Systems and other aspects.Reference of Pentane-1,5-diol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On April 15, 2021, Wang, Zhaojie; Wang, Siqi; Liu, Zhang; Zhou, Binze; Wen, Yanwei; Lu, Zizhe; Chen, Rong; Shan, Bin published an article.COA of Formula: C10H22S The title of the article was Bonding behavior and passivation mechanism of organic ligands (-SH, -NH2, -COOH) on ZnS (1010) surface from first-principles calculations. And the article contained the following:

Ligand design is an important aspect of the surface engineering on the quantum dots. Organic ligands with three types of widely used function groups (-SH, -NH2, -COOH) are chosen to investigate the bonding behavior and electronic properties modification on ZnS (1010) based on first-principles calculations The thermodn. studies of (1010) ligands suggest that -SH and -COOH are prone to undergo a proton dissociation when binding on the surface, while -NH2 remains mol. adsorption on the 2-coordinated Zn atom. The binding strengths of these ligands exhibits the order of -SH > -COOH > -NH2, which is consistent with their ligand exchange ability in experiments The gap states of ZnS (1010) mainly come from 2-coordinated S/Zn, and the passivation effect of -NH2 ligand is inferior to the other two due to the absence of dissociated H which covers the 2-coordinated S. The change of ligand structures shows that ligand length has slight influence on the binding energies, while branched ligands bind more strongly on the surface than those linear ones with the same number of carbon atoms. As for the surface vacancies that cause severe trap states, the ligands tend to be located at bridge sites between two 2-coordinated Zn rather than filling the vacancies. Our study provides an insight into the bonding behavior and passivation mechanism of typical ligands on II-VI QDs at the at. level and gives helpful guidance for surface engineering aimed at improving QD performance. The experimental process involved the reaction of 1-Decanethiol(cas: 143-10-2).COA of Formula: C10H22S

The Article related to zinc sulfide selenide surface passivation adsorption, Surface Chemistry and Colloids: Solid-Liquid Systems and other aspects.COA of Formula: C10H22S

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On June 30, 2020, Gong, Shengxiang; Xu, Bei; Gu, Xinzhe; Li, Wenhui; Yu, Ying; Zhang, Wei; Wang, Zhengwu published an article.Reference of SweetPearlR P300 DC Maltitol The title of the article was Study on the effects of sugar alcohols and Angelica keiskei flour on cookie quality, antioxidant, and nutrition. And the article contained the following:

In this study, the effects of replacing sucrose with maltitol, xylitol, and erythritol on the quality, antioxidant, and nutrition of Angelica keiskei cookies were investigated. Findings : The color and textural parameters of cookies formulated with xylitol and erythritol were significantly (p < .05) different from those of the sucrose cookies, while the cookies made with maltitol showed the color, hardness, and brittleness values closest to the sucrose cookies. Addnl., the cookies formulated with the three sugar alcs. showed lower acid value and peroxide value than the sucrose control. The results of functional analyses showed that A. keiskei flour further enhanced the antioxidant activity and α-amylase inhibitory activity of the maltitol cookies beyond that of maltitol alone. The maltitol A. keiskei cookies showed the lowest pGI of 53.9. Conclusions : The cookie formulated with maltitol showed good quality and storability characteristics. Addnl., the incorporation of maltitol and A. keiskei flour in the cookie recipe significantly increased the antioxidant activity and α-amylase inhibitory activity of the cookies and reduced their glycemic index. Significance and novelty : Maltitol could be considered to be an acceptable sucrose substitute for developing A. keiskei cookies. Furthermore, maltitol and A. keiskei flour are considered to be appropriate ingredients for the development of low-GI functional cookies. The experimental process involved the reaction of SweetPearlR P300 DC Maltitol(cas: 585-88-6).Reference of SweetPearlR P300 DC Maltitol

The Article related to angelica flour cookies sugar alc antioxidant nutrition, Food and Feed Chemistry: Cereals and Bakery Products and other aspects.Reference of SweetPearlR P300 DC Maltitol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On October 27, 2020, Tsvetanova, Martina; Oldenkotte, Valent J. S.; Bertolino, M. Candelaria; Gao, Yuqiang; Siekman, Martin H.; Huskens, Jurriaan; Zandvliet, Harold J. W.; Sotthewes, Kai published an article.Name: 1-Decanethiol The title of the article was Nanoscale Work Function Contrast Induced by Decanethiol Self-Assembled Monolayers on Au(111). And the article contained the following:

In this paper, we obtain maps of the spatial tunnel barrier variations in self-assembled monolayers of organosulfurs on Au(111). Maps down to the sub-nanometer scale are obtained by combining topog. scanning tunneling microscopy images with dI/dz spectroscopy. The square root of the tunnel barrier height is directly proportional to the local work function and the dI/dz signal. We use ratios of the tunnel barriers to study the work function contrast in various decanethiol phases: the lying-down striped β phase, the dense standing-up φ phase, and the oxidized decanesulfonate λ phase. We compare the induced work function variations too: the work function contrast induced by a lying-down striped phase in comparison to the modulation induced by the standing-up φ phase, as well as the oxidized λ phase. By performing these comparisons, we can account for the similarities and differences in the effects of the mechanisms acting on the surface and extract valuable insights into mol. binding to the substrate. The pillow effect, governing the lowering of the work function due to lying-down mol. tails in the striped low d. phases, seems to have quite a similar contribution as the surface dipole effect emerging in the dense standing-up decanethiol phases. The dI/dz spectroscopy map of the nonoxidized β phase compared to the map of the oxidized λ phase indicates that the strong binding of mols. to the substrate is no longer present in the latter. The experimental process involved the reaction of 1-Decanethiol(cas: 143-10-2).Name: 1-Decanethiol

The Article related to decanethiol self assembled monolayer work function gold, Surface Chemistry and Colloids: Solid-Liquid Systems and other aspects.Name: 1-Decanethiol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Ho, L.-H.; Pulsawat, M. M. published an article in 2020, the title of the article was Effects of partial sugar replacement on the physicochemical and sensory properties of low sugar cookies.Application of 585-88-6 And the article contains the following content:

The aim of the present work was to produce low sugar cookies by partial substitution with a sugar replacer (i.e. maltitol, sorbitol, and isomalt) for sucrose. Four different types of cookies were prepared Sucrose was replaced by maltitol, sorbitol, and isomalt at 50% level (based on relative degree of sweetness of sucrose) to produce CMAL50, CSOR50, and CISO50, respec- tively. Cookies that contained sucrose represented the control. All the cookies produced were analyzed for chem. properties, phys. properties, and sensorial acceptance. The chem. anal. results indicated that CMAL50, CSOR50, and CISO50 had higher moisture, crude fiber, and the total carbohydrate content, but with lower ash, crude protein, crude fat, calories, and total sugar content than the control. CSOR50 showed the lowest total sugar content; thus, could be denoted as ‘low sugar’ cookies. Cookies containing maltitol and isomalt presented good phys. quality. The hardness value of cookies decreased with 50% substitution of sorbitol and isomalt for sucrose. CISO50 showed the lowest lightness and yellowness values than other cookie samples. The sensory evaluation results showed that the cookies incorporat- ed with maltitol and isomalt did not influence the overall acceptability of cookies. In conclu- sion, the replacement of sucrose with maltitol, sorbitol, and isomalt could reduce sugar and daily calorie intake. However, sorbitol substitution at 50% level is feasible to produce ‘low sugar’ cookies, and this cookie could provide benefits to weight and health-conscious consumers. The experimental process involved the reaction of SweetPearlR P300 DC Maltitol(cas: 585-88-6).Application of 585-88-6

The Article related to low sugar cookie replacement physicochem sensory property, Food and Feed Chemistry: Cereals and Bakery Products and other aspects.Application of 585-88-6

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On July 29, 2020, Ben Amara, Fadwa; Dionne, Eric R.; Kassir, Sahar; Pellerin, Christian; Badia, Antonella published an article.Quality Control of 1-Decanethiol The title of the article was Molecular Origin of the Odd-Even Effect of Macroscopic Properties of n-Alkanethiolate Self-Assembled Monolayers: Bulk or Interface?. And the article contained the following:

Elucidating the influence of the monolayer interface vs. bulk on the macroscopic properties (e.g., surface hydrophobicity, charge transport, and electron transfer) of organic self-assembled monolayers (SAMs) chem. anchored to metal surfaces is a challenge. This article reports the characterization of prototypical SAMs of n-alkanethiolates on gold (CH3(CH2)nSAu, n = 6-19) at the macroscopic scale by electrochem. impedance spectroscopy and contact angle goniometry, and at the mol. level, by IR reflection absorption spectroscopy. The SAM capacitance, dielec. constant, and surface hydrophobicity exhibit dependencies on both the length (n) and parity (nodd or neven) of the polymethylene chain. The peak positions of the CH2 stretching modes indicate a progressive increase in the chain conformational order with increasing n between n = 6 and 16. SAMs of nodd have a greater degree of structural gauche defects than SAMs of neven. The peak intensities and positions of the CH3 stretching modes are chain length independent but show an odd-even alternation of the spatial orientation of the terminal CH3. The correlations between the different data trends establish that the chain length dependencies of the dielec. constant and surface hydrophobicity originate from changes in the polymethylene chain conformation (bulk), while the odd-even variation arises primarily from a difference in the chem. composition of the interface related to the terminal group orientation. These findings provide new phys. insights into the structure-property relation of SAMs for the design of ultrathin film dielecs. as well as the understanding of stereostructural effects on the elec. characteristics of tunnel junctions. The experimental process involved the reaction of 1-Decanethiol(cas: 143-10-2).Quality Control of 1-Decanethiol

The Article related to self assembled monolayer alkanethiolate gold structure property, Surface Chemistry and Colloids: Solid-Liquid Systems and other aspects.Quality Control of 1-Decanethiol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Majeed, Mudasir; Hussain, Abdullah Ijaz; Chatha, Shahzad Ali Shahid; Kamal, Ghulam Mustafa; Ali, Qasim published an article in 2020, the title of the article was Discrimination of mungbean cultivars/varieties based on minor saccharides composition by HPLC coupled with multivariate statistical analysis.Application In Synthesis of SweetPearlR P300 DC Maltitol And the article contains the following content:

Present study reports the potential use of HPLC coupled with principle component anal. (PCA) and partial least squares discriminant anal. (PLSDA), for differentiation of approved mungbean variety from the promising lines based on minor saccharides profiles. A total of 48 mungbean samples from one approved variety and seven promising lines were analyzed for minor saccharides using HPLC and multivariate statistical anal. PCA showed a clear separation among the classes. PLSDA was conducted to extract the variables that were responsible for the separation of mungbean approved variety from the lines. Maltoheptaose, maltohexaose, maltopentaose, maltotretraose, maltitol, maltose, mannitole, betaine varied significantly while stachyose, raffinose, sucrose, lectitol, dulcitol, xylitol, galactose showed non-significant differences. Maltoheptaose, maltohexaose, maltotretraose, maltitol, mannitole and galactose were found as the most abundant compounds while stachyose, raffinose, sucrose, lectitol and betaine were found less abundant in all lines and approved variety of V. radiata. The study highlights metabolic variation among mungbean variety and lines for minor saccharides profiles and its usefulness for consumers to choose for their desired variety or line as well as for breeders to look into the genetic factors responsible for this variation. The experimental process involved the reaction of SweetPearlR P300 DC Maltitol(cas: 585-88-6).Application In Synthesis of SweetPearlR P300 DC Maltitol

The Article related to vigna saccharide composition hplc multivariate statistical analysis, Food and Feed Chemistry: Cereals and Bakery Products and other aspects.Application In Synthesis of SweetPearlR P300 DC Maltitol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On March 31, 2010, Karthikeyan, K.; Balaji, T. S.; Shanmugasundaram, P.; Chandrasekara Pillai, K. published an article.Formula: C7H16O2 The title of the article was Stability-Indicating HPLC Method for the Determination of Impurities in Meprobamate with Refractive Index Detection. And the article contained the following:

The purpose of this study is to develop and validate a simple, sensitive, and robust high-performance liquid chromatog. (HPLC) method for the determination of impurities ca. 2-methyl-2-propyl-1,3-propane diol (MP0) and 2-hydroxymethyl-2-Me pentyl carbamate (MP1) in meprobamate (MEP) drug substance with refractive index (RI) detection. This method utilizes a Zorbax Eclipse XDB C18 HPLC column, a mobile phase of 80:20 (volume/volume) 10 mM KH2PO4,-acetonitrile, resp. The stability-indicating capability of the method was established by performing stress studies under acidic, basic, oxidation, light, humidity, and thermal conditions. The major degradation products of acid and base hydrolysis are identified as MP0 and MP1. The recovery data obtained for impurities are between 96.0-109.8%. The detection and quantitation limits of this method ranges from 0.009 to 0.017 mg/mL and 0.029 to 0.055 mg/mL, resp. The relative standard deviation (RSD) for the area at QL is < 6.1%. Good linearity (r2 > 0.99) and precision (RSD < 2.2%) were obtained for MEP, MP0, and MP1. This method was applied successfully to determine the content of impurities in MEP bulk drug. (c) 2010 Preston Publications. The experimental process involved the reaction of 2-Methyl-2-propylpropane-1,3-diol(cas: 78-26-2).Formula: C7H16O2

The Article related to meprobamate impurity determination rp hplc stability refractive index, Pharmaceutical Analysis: Synthetic Organic Compounds and other aspects.Formula: C7H16O2

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On November 30, 2021, Carlson, Shane; Becker, Maximilian; Bruenig, Florian N.; Ataka, Kenichi; Cruz, Ruben; Yu, Leixiao; Tang, Peng; Kanduc, Matej; Haag, Rainer; Heberle, Joachim; Makki, Hesam; Netz, Roland R. published an article.Quality Control of 1-Decanethiol The title of the article was Hydrophobicity of Self-Assembled Monolayers of Alkanes: Fluorination, Density, Roughness, and Lennard-Jones Cutoffs. And the article contained the following:

The interplay of fluorination and structure of alkane self-assembled monolayers and how these affect hydrophobicity are explored via mol. dynamics simulations, contact angle goniometry, and surface-enhanced IR absorption spectroscopy. Wetting coefficients are found to grow linearly in the monolayer d. for both alkane and perfluoroalkane monolayers. The larger contact angles of monolayers of perfluorinated alkanes are shown to be primarily caused by their larger mol. volume, which leads to a larger nearest-neighbor grafting distance and smaller tilt angle. Increasing the Lennard-Jones force cutoff in simulations is found to increase hydrophilicity. Specifically, wetting coefficients scale like the inverse square of the cutoff, and when extrapolated to the infinite cutoff limit, they yield contact angles that compare favorably to exptl. values. Nanoscale roughness is also found to reliably increase monolayer hydrophobicity, mostly via the reduction of the entropic part of the work of adhesion. Anal. of depletion lengths shows that droplets on nanorough surfaces partially penetrate the surface, intermediate between Wenzel and Cassie-Baxter states. The experimental process involved the reaction of 1-Decanethiol(cas: 143-10-2).Quality Control of 1-Decanethiol

The Article related to fluorination roughness hydrophobicity self assembled monolayer alkane, Surface Chemistry and Colloids: Solid-Liquid Systems and other aspects.Quality Control of 1-Decanethiol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

On March 3, 2021, Han, Yunrui; Han, Lin; He, Limin; Wang, Shipeng; Luo, Xiaoming published an article.Related Products of 143-10-2 The title of the article was Universal Criterion for Critical Motion of Droplets Adhered on Surfaces with Different Wettability in Laminar Flow. And the article contained the following:

The initial motion of micro-oil droplets on substrates immersed in water is of great significance to study droplet motion. Here, microscopic experiments and mechanism anal. are used to establish a universal criterion and a math. model describing the critical conditions for the initial motion of droplets adhered on surfaces with different wettability in the laminar flow. The authors demonstrate a surface modification technique and anal. method in a microtest. Based on the force’s anal. on the 3-phase contact points of 2-dimensional oil droplets on the surfaces, the movement mechanism is also obtained when the oil droplets start to move. This work focuses on the coupling effects of oil droplet’s height, surface properties, and water flow velocity on the initial motion behaviors of oil droplets and obtains the critical shear water flow velocity required for the critical movement of oil droplets from different surfaces. The authors achieve a universal criterion and model for different application scenarios, which are of great scientific significance to improve theor. systems of multiphase separation and guide the design and optimization of surface properties and flow field velocity. The experimental process involved the reaction of 1-Decanethiol(cas: 143-10-2).Related Products of 143-10-2

The Article related to critical motion droplet surface wettability laminar flow silicone oil, Surface Chemistry and Colloids: Solid-Liquid Systems and other aspects.Related Products of 143-10-2

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts