Month: October 2021

HPLC of Formula: C8H10O2. Authors Wei, DY; Yang, P; Yu, CM; Zhao, FK; Wang, YL; Peng, ZH in AMER CHEMICAL SOC published article about in [Wei, Dongyue; Yang, Peng; Yu, Chuanman; Zhao, Fengkai; Wang, Yilei; Peng, Zhihua] China Univ Petr East China, Coll Sci, Dept Chem, Qingdao 266580, Shandong, Peoples R China in 2021, Cited 51. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

A manganese-catalyzed N-alkylation reaction of amines with alcohols via hydrogen autotransfer strategy has been demonstrated. The developed practical catalytic system including an inexpensive, nontoxic, commercially available MnCl2 or MnBr(CO) s as the metal salt and triphenylphosphine as a ligand provides access to diverse aromatic, heteroaromatic, and aliphatic secondary amines in moderate-to-high yields. In addition, this operationally simple protocol is scalable to the gram level and suitable for synthesizing heterocycles such as indole and resveratrol-derived amines known to be active for Alzheimer’s disease.

HPLC of Formula: C8H10O2. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Wei, DY; Yang, P; Yu, CM; Zhao, FK; Wang, YL; Peng, ZH or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

I found the field of Chemistry very interesting. Saw the article The Detosylation of Chiral 1,2-Bis(tosylamides) published in 2021. Product Details of 105-13-5, Reprint Addresses Keller, PA (corresponding author), Univ Wollongong, Sch Chem & Mol Biosci, Mol Horizons, Wollongong, NSW 2522, Australia.; Keller, PA (corresponding author), Illawarra Hlth & Med Res Inst, Wollongong, NSW 2522, Australia.. The CAS is 105-13-5. Through research, I have a further understanding and discovery of (4-Methoxyphenyl)methanol

The deprotection of chiral 1,2-bis(tosylamides) to their corresponding 1,2-diamines is mostly unsuccessful under standard conditions. In a new methodology, the use of Mg/MeOH with sufficient steric additions allows the facile synthesis of 1,2-diamines in 78-98% yields. These results are rationalized using density functional theory and the examination of inner and outer-sphere reduction mechanisms.

Product Details of 105-13-5. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Gaston, JJ; Tague, AJ; Smyth, JE; Butler, NM; Willis, AC; Hommes, NV; Yu, HB; Clark, T; Keller, PA or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

HPLC of Formula: C8H10O2. I found the field of Chemistry very interesting. Saw the article A green approach for aerobic oxidation of benzylic alcohols catalysed by Cu-I-Y zeolite/TEMPO in ethanol without additional additives published in 2021, Reprint Addresses Zhong, W; Liu, XM (corresponding author), Jiaxing Univ, Coll Biol Chem Sci & Engn, Jiaxing, Zhejiang, Peoples R China.. The CAS is 105-13-5. Through research, I have a further understanding and discovery of (4-Methoxyphenyl)methanol.

An efficient and green protocol for aerobic oxidation of benzylic alcohols in ethanol using Cu-I-Y zeolite catalysts assisted by TEMPO (TEMPO = 2,2,6,6-tetramethyl-1-piperidine-N-oxyl) as the radical co-catalyst in the presence of atmospheric air under mild conditions is reported. The Cu-I-Y zeolite prepared via ion exchange between CuCl and HY zeolite was fully characterized by a variety of spectroscopic techniques including XRD, XPS, SEM, EDX and HRTEM. The incorporation of Cu(i) into the 3D-framework of the zeolite rendered the catalyst with good durability. The results of repetitive runs revealed that in the first three runs, there was hardly a decline in activity and a more substantial decrease in yield was observed afterwards, while the selectivity remained almost unchanged. The loss in activity was attributed to both the formation of CuO and the bleaching of copper into the liquid phase during the catalysis, of which the formation of CuO was believed to be the major contributor since the bleaching loss for each run was negligible (<2%). In this catalytic system, except TEMPO, no other additives were needed, either a base or a ligand, which was essential in some reported catalytic systems for the oxidation of alcohols. The aerobic oxidation proceeded under mild conditions (60 degrees C, and 18 hours) to quantitatively and selectively convert a wide range of benzylic alcohols to corresponding aldehydes, which shows great potential in developing green and environmentally benign catalysts for aerobic oxidation of alcohols. The system demonstrated excellent tolerance against electron-withdrawing groups on the phenyl ring of the alcohols and showed sensitivity to steric hindrance of the substrates, which is due to the confinement of the pores of the zeolite in which the oxidation occurred. Based on the mechanism reported in the literature for homogenous oxidation, a mechanism was analogously proposed for the aerobic oxidation of benzylic alcohols catalysed by this Cu(i)-containing zeolite catalyst. HPLC of Formula: C8H10O2. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Senthilkumar, S; Zhong, W; Natarajan, M; Lu, CX; Xu, BY; Liu, XM or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Authors Feng, XY; Pi, YH; Song, Y; Xu, ZW; Li, Z; Lin, WB in AMER CHEMICAL SOC published article about in [Feng, Xuanyu; Pi, Yunhong; Song, Yang; Xu, Ziwan; Lin, Wenbin] Univ Chicago, Dept Chem, Chicago, IL 60637 USA; [Pi, Yunhong; Li, Zhong] South China Univ Technol, Sch Chem & Chem Engn, Guangzhou 510640, Peoples R China in 2021, Cited 63. Category: alcohols-buliding-blocks. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

We report here the construction of two metal-organic frameworks (MOFs), Zr-6-Cu/Fe-1 and Zr-6–Cu/Fe-2, by integrating earth-abundant cuprous photosensitizers (Cu-PSs) and Fe catalysts for photocatalytic aerobic oxidation. Site isolation and pore confinement stabilize both Cu-PSs and Fe catalysts, while the proximity between active centers facilitates electron and mass transfer. Upon visible light irradiation and using O-2 as the only oxidant, Zr-6-Cu/Fe-1 and Zr-6-Cu/ Fe-2 efficiently oxidize alcohols and benzylic compounds to afford corresponding carbonyl products with broad substrate scopes, high turnover numbers of up to 500 with a 9.4-fold enhancement over homogeneous analogues, and excellent recyclability in four consecutive runs. Control experiments, spectroscopic evidence, and computational studies revealed the photooxidation mechanism: oxidative quenching of [Cu-PS]* by O-2 affords [Cu-II-PS], which efficiently oxidizes Fe-III-OH to generate a hydroxyl radical for substrate oxidation. This work highlights the potential of MOFs in promoting earth-abundant metal-based photocatalysis.

Category: alcohols-buliding-blocks. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Feng, XY; Pi, YH; Song, Y; Xu, ZW; Li, Z; Lin, WB or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

I found the field of Chemistry very interesting. Saw the article Covalent organic framework stabilized CdS nanoparticles as efficient visible-light-driven photocatalysts for selective oxidation of aromatic alcohols published in 2021. Name: (4-Methoxyphenyl)methanol, Reprint Addresses Huang, XB (corresponding author), Univ Sci & Technol Beijing, Beijing Adv Innovat Ctr Mat Genome Engn, Sch Mat Sci & Engn, Beijing Key Lab Funct Mat Mol & Struct Construct, Beijing 100083, Peoples R China.. The CAS is 105-13-5. Through research, I have a further understanding and discovery of (4-Methoxyphenyl)methanol

Noble-metal-free photocatalysts with high and stable performance provide an environmentally-friendly and cost-efficient route for green organic synthesis. In this work, CdS nanoparticles with small particle size and different amount were successfully deposited on the surface of covalent organic frameworks (COFs). The deposition of suitable content of CdS on COFs could not only modify the light adsorption ability and the intrinsic electronic properties, but also enhance the photocatalytic activity and cycling performance of CdS for the selective oxidation of aromatic alcohols under visible light. Especially, COF/CdS-3 exhibited the highest yield (97.1%) of benzaldehyde which is approximately 2.5 and 15.9 times as that of parental CdS and COF, respectively. The results show that the combination of CdS and COF can improve the utilization of visible light and the separation of photo-generated charge carriers, and COF with the pi-conjugated system as supports for CdS nanoparticles could provide efficient electron transport channels and improve the photocatalytic performance. Therefore, this kind of COF-supported photocatalysts with accelerated photo-induced electrons and charge-carrier separation between semiconductors possesses great potentials in future green organic synthesis. (C) 2021 Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences. Published by Elsevier B.V. All rights reserved.

Name: (4-Methoxyphenyl)methanol. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Zhang, KY; Lu, GL; Xi, ZS; Li, YQ; Luan, QJ; Huang, XB or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

An article Retrospective review of Kawasaki disease at the Women’s and Children’s Hospital, South Australia WOS:000656443500001 published article about INTRAVENOUS IMMUNOGLOBULIN TREATMENT; CORONARY-ARTERY ABNORMALITIES; PREDICTION; RESISTANCE; EFFICACY; THERAPY; PREDNISOLONE; PREVENTION; ANEURYSMS; TRIAL in [Davidson, Hannah; Kelly, Andrew] Univ Adelaide, Womens & Childrens Hosp, Dept Cardiol, Adelaide, SA, Australia; [Agrawal, Rishi] Univ Adelaide, Womens & Childrens Hosp, Dept Gen Paediat Med, Adelaide, SA, Australia; [Kelly, Andrew; Agrawal, Rishi] Univ Adelaide, Fac Hlth & Med Sci, Dept Paediat Adelaide, Adelaide, SA, Australia in , Cited 25. Recommanded Product: (4-Methoxyphenyl)methanol. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

Aim Kawasaki disease (KD) is one of the most common causes of acquired cardiac disease in children in high-income countries. The incidence of coronary artery disease (CAD), despite treatment with intravenous immunoglobulin, ranges from 5 to 20%. Determining risk factors for CAD may assist with management and reduce long-term complications. Methods Retrospective data were collected for all patients presenting to the Women’s and Children’s Hospital with a discharge diagnosis of KD over a 10.5-year period, from 2007 to 2018. Results A total of 141 patients were included in the review; 101 patients fulfilled complete criteria for KD; 25 incomplete criteria and 15 did not meet criteria but were treated for KD. CAD was present in 27.7% of all patients, ranging from ectasia to giant aneurysms based on Z-scores and echocardiogram descriptions. Medium to large aneurysms accounted for 8.5% of all patients with suspected KD. Patients with CAD were more likely to: fulfil incomplete criteria (odds ratio (OR) 4.3, 95% confidence interval (CI) 1.7-10.8, P = 0.0027), be less than 12 months of age (OR 11.38, 95% CI 2.94-44.11, P = 0.0001), have CRP > 100 (OR 2.8, 95% CI 1.31-6.02, P = 0.0068) and have a delay in treatment (average day of illness prior to treatment 8.89 vs. 6.78 (OR 1.19, 95% CI 1.05-1.35, P = 0.0055)). Patients with a Kobayashi score >= 4 had a higher rate of re-treatment with intravenous immunoglobulin (OR 3.16, 95% CI 1.27-7.83, P = 0.013). Conclusion Our data are consistent with previously reported risk factors, and high rates of CAD despite standard treatment.

Recommanded Product: (4-Methoxyphenyl)methanol. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Davidson, H; Kelly, A; Agrawal, R or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Authors Kon, Y; Nakashima, T; Yada, A; Fujitani, T; Onozawa, SY; Kobayashi, S; Sato, K in ROYAL SOC CHEMISTRY published article about in [Kon, Yoshihiro; Nakashima, Takuya; Yada, Akira; Fujitani, Tadahiro; Onozawa, Shun-ya; Kobayashi, Shu; Sato, Kazuhiko] Natl Inst Adv Ind Sci & Technol, Interdisciplinary Res Ctr Catalyt Chem, Tsukuba, Ibaraki 3058565, Japan; [Kobayashi, Shu] Univ Tokyo, Sch Sci, Dept Chem, Bunkyo Ku, Tokyo 1130033, Japan in 2021, Cited 41. Recommanded Product: 105-13-5. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

The oxidation of alcohols to aldehydes is a powerful reaction pathway for obtaining valuable fine chemicals used in pharmaceuticals and biologically active compounds. Although many oxidants can oxidize alcohols, only a few hydrogen peroxide oxidations can be employed to continuously synthesize aldehydes in high yields using a liquid-liquid two-phase flow reactor, despite the possibility of the application toward a safe and rapid multi-step synthesis. We herein report the continuous flow synthesis of (E)-cinnamaldehyde from (E)-cinnamyl alcohol in 95%-98% yields with 99% selectivity for over 5 days by the selective oxidation of hydrogen peroxide using a catalyst column in which Pt is dispersed in SiO2. The active species for the developed selective oxidation is found to be zero-valent Pt(0) from the X-ray photoelectron spectroscopy measurements of the Pt surface before and after the oxidation. Using Pt black diluted with SiO2 as a catalyst to retain the Pt(0) species with the optimal substrate and H2O2 introduction rate not only enhances the catalytic activity but also maintains the activity during the flow reaction. Optimizing the contact time of the substrate with Pt and H2O2 using a flow reactor is important to proceed with the selective oxidation to prevent the catalytic H2O2 decomposition.

Recommanded Product: 105-13-5. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Kon, Y; Nakashima, T; Yada, A; Fujitani, T; Onozawa, SY; Kobayashi, S; Sato, K or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Quality Control of (4-Methoxyphenyl)methanol. I found the field of Chemistry very interesting. Saw the article Introduction of a trinuclear manganese(iii) catalyst on the surface of magnetic cellulose as an eco-benign, efficient and reusable novel heterogeneous catalyst for the multi-component synthesis of new derivatives of xanthene published in 2021, Reprint Addresses Bagherzade, G (corresponding author), Univ Birjand, Fac Sci, Dept Chem, Birjand 97175615, Iran.. The CAS is 105-13-5. Through research, I have a further understanding and discovery of (4-Methoxyphenyl)methanol.

In this work, the new trinuclear manganese catalyst defined as Fe3O4@NFC@NNSM-Mn(iii) was successfully manufactured and fully characterized by different techniques, including FT-IR, XRD, TEM, SEM, EDX, VSM, and ICP analysis. There have been reports of the use of magnetic catalysts for the synthesis of xanthine derivatives. The critical potential interest in the present method include short reaction time, high yields, recyclability of the catalyst, easy workup, and the ability to sustain a variety of functional groups, which give economical as well as ecological rewards. Also, the synthesized catalyst was used as a recyclable trinuclear catalyst in alcohol oxidation reactions at 40 degrees C. The magnetic catalyst activity of Fe3O4@NFC@NNSM-Mn(iii) could be attributed to the synergistic effects of the catalyst Fe3O4@NFC@NNS-Mn(iii) with melamine. Employing a sustainable and safe low temperature, using an eco-friendly solvent, no need to use any additive, and long-term stability and magnetic recyclability of the catalyst for at least six successive runs are the advantages of the current protocol towards green chemistry. This protocol is a benign, environmentally friendly method for heterocycle synthesis.

Quality Control of (4-Methoxyphenyl)methanol. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Kargar, PG; Bagherzade, G; Eshghi, H or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Authors Paul, A; Shipman, MA; Onabule, DY; Sproules, S; Symes, MD in ROYAL SOC CHEMISTRY published article about in [Paul, Avishek; Shipman, Michael A.; Onabule, Dolapo Y.; Sproules, Stephen; Symes, Mark D.] Univ Glasgow, Sch Chem, WestCHEM, Univ Ave, Glasgow G12 8QQ, Lanark, Scotland in 2021, Cited 30. Computed Properties of C8H10O2. The Name is (4-Methoxyphenyl)methanol. Through research, I have a further understanding and discovery of 105-13-5

The enhancement of reactivity inside supramolecular coordination cages has many analogies to the mode of action of enzymes, and continues to inspire the design of new catalysts for a range of reactions. However, despite being a near-ubiquitous class of reactions in organic chemistry, enhancement of the reduction of carbonyls to their corresponding alcohols remains very much underexplored in supramolecular coordination cages. Herein, we show that encapsulation of small aromatic aldehydes inside a supramolecular coordination cage allows the reduction of these aldehydes with the mild reducing agent sodium cyanoborohydride to proceed with high selectivity (ketones and esters are not reduced) and in good yields. In the absence of the cage, low pH conditions are essential for any appreciable conversion of the aldehydes to the alcohols. In contrast, the specific microenvironment inside the cage allows this reaction to proceed in bulk solution that is pH-neutral, or even basic. We propose that the cage acts to stabilise the protonated oxocarbenium ion reaction intermediates (enhancing aldehyde reactivity) whilst simultaneously favouring the encapsulation and reduction of smaller aldehydes (which fit more easily inside the cage). Such dual action (enhancement of reactivity and size-selectivity) is reminiscent of the mode of operation of natural enzymes and highlights the tremendous promise of cage architectures as selective catalysts.

Computed Properties of C8H10O2. About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Paul, A; Shipman, MA; Onabule, DY; Sproules, S; Symes, MD or concate me.

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts

Safety of (4-Methoxyphenyl)methanol. Recently I am researching about BORROWING HYDROGEN; ALPHA-ALKYLATION; AROMATIC-AMINES; BOND FORMATION; COMPLEXES; EFFICIENT; KETONES; STRATEGY; LIGANDS; IMINES, Saw an article supported by the NSFCNational Natural Science Foundation of China (NSFC) [21673301, 21973113, 21977019]; Guangdong Natural Science Funds for Distinguished Young Scholar [2015A030306027]; Tip-top Youth Talents of Guangdong Special Support Program [20153100042090537]; Fundamental Research Funds for the Central UniversitiesFundamental Research Funds for the Central Universities. Published in WILEY-V C H VERLAG GMBH in WEINHEIM ,Authors: Lan, XB; Ye, ZR; Yang, CH; Li, WK; Liu, JH; Huang, M; Liu, Y; Ke, ZF. The CAS is 105-13-5. Through research, I have a further understanding and discovery of (4-Methoxyphenyl)methanol

The implementation of non-noble metals mediated chemistry is a major goal in homogeneous catalysis. Borrowing hydrogen/hydrogen autotransfer (BH/HA) reaction, as a straightforward and sustainable synthetic method, has attracted considerable attention in the development of non-noble metal catalysts. Herein, we report a tungsten-catalyzed N-alkylation reaction of anilines with primary alcohols via BH/HA. This phosphine-free W(phen)(CO)(4) (phen=1,10-phenthroline) system was demonstrated as a practical and easily accessible in-situ catalysis for a broad range of amines and alcohols (up to 49 examples, including 16 previously undisclosed products). Notably, this tungsten system can tolerate numerous functional groups, especially the challenging substrates with sterically hindered substituents, or heteroatoms. Mechanistic insights based on experimental and computational studies are also provided.

About (4-Methoxyphenyl)methanol, If you have any questions, you can contact Lan, XB; Ye, ZR; Yang, CH; Li, WK; Liu, JH; Huang, M; Liu, Y; Ke, ZF or concate me.. Safety of (4-Methoxyphenyl)methanol

Reference:
Alcohol – Wikipedia,
,Alcohols – Chemistry LibreTexts